Diamond 916317 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Diamond 916317. Diamond 916317 13 pages.

Imprimer la page
Diamond 916317 Manuel
•
Select the washing cycle suited to the type of dishes using PROGRAMME SELECTION (3); with
the button pressed, the shorter cycle is enabled (Fig. 4).
•
Press START (3) for automatic start (Fig. 6).
•
Lower the hood, the cycle starts automatically and the CYCLE UNDERWAY (5) led starts to flash.
•
When the cycle is completed the CYCLE UNDERWAY (5) led goes off.
•
The next cycles come on simply by lowering the hood.
•
For rapid drying, remove the rack from the machine as soon as the cycle finishes.
•
To stop a wash cycle early, press START (3).
•
Move the washing and rinsing arms at right angles to the edge of the door (Fig.7).
•
Lift each semi-filter by the relative handle.
•
Switch the dishwasher off.
•
If present, remove the integral filter (Fig.7 A).
•
Pull up and remove the overflow pipe (Fig. 8 B).
•
Wait for the tub to empty completely.
•
If necessary, extract the tub filter and clean (Fig. 8 C).
•
Switch the dishwasher off.
•
If present, remove the integral filter (Fig.7 A).
•
Pull up and remove the overflow pipe (Fig. 9).
•
Close the door.
•
Press the DRAIN (2) button for a few seconds to start the cycle;
•
In the versions without a drain button, press START (4) for a few seconds to start the drain cycle.
•
The drain cycle is shown by the POWER (5) led coming on and the CYCLE UNDERWAY (5)led
flashing.
•
The machine runs a drain cycle and then switches off.
•
If necessary, extract the tub filter and clean (Fig. 8 C).
In machines with internal water softener, a regeneration cycle should be run periodically to ensure the
correct operation of the softener. The number of cycles between one resin regeneration and the next
depends on the hardness of the local water, and should be set in accordance with the following table.
No.
dH
°F
Cycles
6
10
160
7
12
150
8
14
140
9
16
130
10
18
120
11
20
110
12
21
100
INSTRUCTION MANUAL FOR DISHWASHERS
dH
°F
Cycles
13
23
14
25
15
27
16
29
17
30
18
32
19
34

4.5 Removing the integral filter

4.6 Emptying the dishwasher

4.6.1 Appliances with no drain pump

4.6.2 Appliances with drain cycle (*optional)

4.7

Resin regeneration (*optional)

No.
90
80
70
60
50
40
30
UK

4.4.2 Hood dishwashers

Page 7 of 10