AQUAPHOR RO-102S Manuel du propriétaire - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AQUAPHOR RO-102S. AQUAPHOR RO-102S 20 pages. Reverse osmosis system
Également pour AQUAPHOR RO-102S : Manuel du propriétaire (16 pages)
Imprimer la page
5. RO installation, Сont.
Connection node assembly
Shutoff valve set
in closed position
Locking clip
Figure 5. Connection node installation scheme
Turn the water off at the cold water main.
Open the kitchen faucet to discharge pressure into the water line.
Unscrew the nut from the flexible line cap, leading to the faucet on the cold water main.
ATTENTION! Residual water will be left inside of the flexible JG tube after discharge of water.
When disconnecting the flexible line, please use a 200 ml or similar size container to drain the
water left behind in the tube.
Screw the cap nut off the connection node and on the cold water main thread.
Screw the cap nut off the flexible line, and then on the connection node thread.
Set the shutoff valve on the connection node to the closed position and then make sure that the connection
is completely leak-proof by supplying water to the cold water main.
Connect JG tube (follow the instructions below to correctly connect the JG tubes).
ATTENTION! Make sure that the sealing O-Ring is located correctly in its place and not dam-
aged during installation.
AQUAPHOR RO-101S, RO-102S
Sealing O-Ring
Cold water main
Connection
node
9