AQUAPHOR RO-102S Manuel du propriétaire - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AQUAPHOR RO-102S. AQUAPHOR RO-102S 16 pages. Reverse osmosis system
Également pour AQUAPHOR RO-102S : Manuel du propriétaire (20 pages)

Imprimer la page

Replacing the conditioning

cartridge K7M / К7ВМ

1. Set the shutoff valve on the connection node

into the closed position; then open the clean

water faucet to discharge pressure.

2. Press the button above the cartridge, and then

rotate the used conditioning cartridge K7M /

К7ВМ in a clockwise direction to remove it.

3. Install a new conditioning cartridge.

4. Set the shutoff valve on the connection node

into the open position; then wait for all of

the water to flow out from the storage tank

through the clean water faucet.

5. Then close the clean water faucet.

6. When the tank is filled, your RO is ready for

operation.

7. Make sure that RO is properly sealed.

Replacing the membrane

cartridge

1. Set the shutoff valve on the connection node

into the closed position, and then open the

clean water faucet to discharge pressure.

2. Press the button above the cartridge, and

then rotate the used membrane cartridge

in a clockwise direction to remove it.

3. Install a new membranecartridge in place of

the removed one.

4. Turn the shutoff valve on the connection node

to the open position.

5. Flush the water through RO for duration of

approximately 1 hour.*

6. Close the clean water faucet.

7. When the tank is filled, RO is ready for

operation.

8. Make sure that RO is properly sealed.

ATTENTION!

To avoid any incorrect installation

of the membrane cartridge and the resulting loss

of sealing of the RO connections, it is not recom-

mended to dissemble it without a fully qualified

maintenance specialist. If the RO connections

are leaking, immediately close the tap on the

* Depending upon storage, transportation and operation con-

ditions, complete flushing of the membrane cartridge may take

up to 24 hours.

connection unit and check the cartridges for

correct installation.

11. Recommended filter

replacement

The frequency at which the filter and membrane

cartridges should be replaced depends on the

quality of the water that enters the appliance.

Contact your water treatment specialist for re-

placement filters and parts.

NOTE:

The installation of the RO appliance on

a pre-treated water supply will greatly increase

the life of its filters.

Table 3. Recommended filter

replacement

Filter Cartridges

Replacement filter cartridge

К5 / К1 (1)

Replacement filter cartridge

K2 (2)

Replacement membrane car-

tridge RO-50S / RO-100S (3)

Replacement filter cartridge

K7M (4)

Replacement filter cartridge

K7BM (4)

Once purchased, the cartridges can be stored

for three years from the manufacturing date.

12. Recommended filter

maintenance

The frequency at which the filter and membrane

cartridges should be replaced depends on your

tap water quality.

Note: Any filter that demonstrates reduced water

production or a slower rate of flow is likely to be

overdue for a change.

WARNING:

Shut off the water to the appliance

before beginning any maintenance work.

Recommended

Replace ment

(months)