BURL B2 Bomber ADC Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} BURL B2 Bomber ADC. BURL B2 Bomber ADC 17 pages. B2 bomber adc b2 bomber dac with dante
Imprimer la page
Getting Started:
1.
Connect XLR cables to analog input.
2.
Connect desired digital output (Dante, AES, SPDIF or Optical).
3.
Connect Word Clock cables if clocking via Word Clock (clocking via Dante, SPDIF or AES is also possible).
4.
Set clock to Int. or Ext. (Internal clock recommended whenever possible).
5.
Set sample rate on front panel, when clock master.
Select Dual Wire On or Off.
6.
Set input level. We recommend starting at -18 dbfs.
7.
B2 Bomber ADC Signal Path
INPUT
PIN 2
PIN 3
PIN 1
Getting Started:
1.
Connect XLR cables to analog) output.
2.
Connect desired digital Input Source (Dante, AES, SPDIF or Optical).
3.
Connect Word Clock cables if clocking via Word Clock (clocking via Dante, SPDIF or AES is also possible).
4.
Select Input Source.
Set clock to Int., Ext. or Digital In (Internal clock recommended whenever possible).
5.
6.
Set sample rate on front panel, when clock master.
7.
Set Output Level.
B2 Bomber DAC Signal Path
DAC
Figure 2
B2 BOMBER ADC
BX1 Input
Transformer
Input Level
B2 BOMBER DAC
Attenuator
6
ADC
Figure 1
BOPA1
OUTPUT
+ PIN 2
- PIN 3
PIN 1
BOPA1