BURL B2 Bomber DAC Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} BURL B2 Bomber DAC. BURL B2 Bomber DAC 17 pages. B2 bomber adc b2 bomber dac with dante
Imprimer la page
About
Imagine the possibilities when all audio devices can be networked. Large facilities with multiple
control rooms and studios can have easy access to each other. Imagine one control room runs out
of outboard gear for a mix. No problem, route audio to the AD/DA in the next control room, utilizing
its outboard gear. Need to use two studio main rooms with one control room? Easy, one DAW has
total access to the other studio's AD/DA. The band wants to monitor in the lounge? Again, that is
no problem, all over standard CAT5e or CAT6 through a gigabit switch. How about simple 2 channel
monitoring of a mix-down on a laptop? With Dante's virtual sound card and an Ethernet jack, also not
a problem.
Dante is what makes this all possible and now BURL Audio has embraced this technology. The B80
Mothership, the B2 Bomber ADC and the B2 Bomber DAC are now all Dante compatible.
Now you can run multiple B2 Bombers or a B80 Mothership from a laptop or any computer with just
an Ethernet jack. Not only that, but any digital gear, including mixing consoles with Dante, can now
directly interface with the B80 Mothership and the B2 Bombers.
For more information please visit www.burlaudio.com/burl-audio-with-dante
About Dante Vitrual Soundcard:
The Dante Virtual Soundcard is a software application that turns your PC or Mac into a Dante-
enabled device, allowing Dante audio traffic to be transmitted and received using the standard
Ethernet port. No additional hardware is required.
The latest version of the Dante Virtual Soundcard supports the Core Audio (Mac OS X), Steinberg
ASIO (Windows), and WDM (Windows) audio interfaces, and can be used with any supporting
audio application.
Once you install the Dante Virtual Soundcard on a PC or Mac and connect it to the Dante network,
you can:
•
View and change the current audio sample rate
•
Customize the receive latency (latency a receiving device should use before play out)
•
View and set your Ethernet network interface, and view network interface details
•
Start and stop the Dante Virtual Soundcard
•
Select the number of audio channels available in the Dante Virtual Soundcard (CoreAudio and
ASIO only)
•
On Windows, you can also:
- Select ASIO or WDM mode
- View and set ASIO- specific parameters
FOR MORE INFORMATION ABOUT DANTE SOUNDCARD PLEASE VISIT
https://www.audinate.com/resources/technical-documentation
7