Aquaport AQP-TAP-4G Manuel d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Aquaport AQP-TAP-4G. Aquaport AQP-TAP-4G 14 pages. Filtered water sink mixer 4 way tap

Imprimer la page

WATER QUALITY

Caution: For use with municipal water only.

SAFETY PRECAUTIONS

Warning: It is essential that these Installation and Operating

Instructions be strictly observed, for correct operation

of this appliance.

We recommend a qualified licensed plumber install the system,

who is prepared to guarantee their workmanship.

Prior to installation, check for any existing State or Local Plumbing

Codes, to ensure installation is compliant.

Warning: Tap must never be installed using acetone silicones.

Tap must be installed with an isolating tap in accordance with local

authority installation codes.

Wipe tap in one direction only, applying minimal pressure on tap.

Use only a soft dry cloth with warm soapy water to clean the

surface of the tap. Never use harsh detergents or abrasive

cleaners.

To maintain tap lacquer, use a soft cloth or wipe over tap with

warm soapy water to remove surface dust where tap remains dry.

System

Specifications

Working Pressure

Working Temperature:

Note: Recommended working pressure: 300 to 700 kpa

Maximum difference in pressure between hot and cold supply

should be 150 kpa.

Where normal working pressures exceed maximum working

pressure stated above in the System Specifications, a pressure

limiting valve should be installed.

Maximum:

Minimum:

860 kpa

300 kpa

1ºC

80ºC

INSTALLATION AND OPERATING INSTRUCTIONS 1