Burley Solo ST Manuel d'instruction et de sécurité du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et de sécurité du propriétaire pour {nom_de_la_catégorie} Burley Solo ST. Burley Solo ST 16 pages. Child trailer
Imprimer la page
Using Parking Brake
Engage parking brake by pushing handle to the right. Exercise
caution when disengaging brake, as it may spring to the
left.
PHOTO 5
Installing Tow Bar
1. On left side of trailer, depress buttons on top and bottom
of tow bar clamp and swing clamp partially open.
NOTE: When installing tow bar, do not swing the clamp all the
way open.
PHOTO 6
2. Slowly slide tow bar into tow bar mount until the detent
clicks into place.
PHOTO 6
3.
Pull on tow bar to check that it is completely locked
in place.
4. Install retaining pin.
PHOTO 7
5. Close clamp firmly, making sure clamp latch is
engaged.
PHOTO 7
6. To remove tow bar, remove retaining pin,
and slide tow bar out of mount.
way open
WARNING
NEVER OPERATE TRAILER WITHOUT TOW BAR CLAMP LOCKED IN
PLACE. AN UNLOCKED TOW BAR CAN LOOSEN OR DETACH,
CAUSING ACCIDENT RESULTING IN SERIOUS INJURY.
Burley Jogger and We! Ski can add to your trailering fun! Go
to www.burley.com to check out the Burley accessory kits
available for your trailer.
To install the tow bar when using these accessories:
For the Burley Jogger and We! Ski Kits, follow the
instructions above.
6
B U R L E Y D ' L I T E S T A N D S O L O S T O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
PHOTO 5
Tow Bar
PHOTO 6:
pull clamp all the
PHOTO 8
Tow Bar
PHOTO 7:
PHOTO 8
Brake Handle Engaged
Detent
Install tow bar
Tow Bar Mount
Clamp Latch
Button
Tow Bar Clamp
Lock tow bar in place
Slide Out
Tow Bar
: Removing tow bar
Brake
Tow Bar
Mount
Button
Tow Bar
Clamp
Retaining Pin
Cl o se
Tow Bar
Mount
O p e n
Button
Tow bar clamp in open position