Burley PICCOLO Manuel d'instructions du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions du propriétaire pour {nom_de_la_catégorie} Burley PICCOLO. Burley PICCOLO 8 pages. Trailercycle
Également pour Burley PICCOLO : Brochure & Specs (5 pages), Manuel d'instruction du propriétaire (12 pages), Manuel d'instruction et de sécurité du propriétaire (10 pages), Manuel d'utilisation et de sécurité (20 pages), Manuel d'instruction du propriétaire (16 pages)

Trailercycle Assembly

IMPORTANT

FOLLOW ALL ASSEMBLY INSTRUCTIONS CLOSELY.

1. Mount pedals (stamped R for right and L for left) to

corresponding crank arm and tighten.

2. With screw, mount reflector bracket on left seat stay.

Fasten reflector to bracket with mounting screw.

3. Slide flag into bracket.

Fasten splashguard to stem with two

PICColo onlY:

6 mm bolts supplied with fender.

5. Insert seat post into seat tube. Tighten quick release

lever. Ensure that the minimum insertion mark, or at

least 2 ½" (63.5mm) on the seat post remains inside

the frame.

6. To install handlebar, remove face plate, place

handlebar into clamp and replace face plate, clamping

handlebar to stem. Center handlebar in stem.

Tighten bolts.

7. Insert trailercycle tongue into hitch spindle and

tighten both nuts securely.

B U R L E Y P I C C O L O A N D K A Z O O O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

PHOTOS 2A AND 2B

1 STEPS 1 THROUGH 5

Before tongue insertion

After nuts tightened