ChromTech Porvair Miniseal II Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ChromTech Porvair Miniseal II. ChromTech Porvair Miniseal II 20 pages.

Health & Safety Notes

Statement:

Warning: Do not operate this instrument in an atmosphere containing explosive gases.

Statement:

Warning: Only approved, supplied mains cord set must be used with this instrument.

Statement:

Warning: If it is required to use an extension lead, the lead MUST be earthed.

Statement:

Voltage: The MiniSeal 2 is supplied for direct connection to normal 115 / 220 VAC 50 / 60Hz

supply, with a variation in supply that gives a voltage range of 108VAC to 250VAC

• The MiniSeal 2 is designed to be operated with a maximum sealing temperature of 200

• The MiniSeal 2 should be switched on five minutes prior to use when plugged into 230V and 6

minutes when plugged into 110V. This is to enable the set temperature to be reached and to

stabilise.

• The MiniSeal 2 should only be used in a suitably ventilated area. The use of solvents on the

unit is not recommended.

• Certain components become hot during the correct operation of the equipment.

These components are marked with the hot surface symbol

avoid personal injury.

• Porvair Sciences accepts no responsibility for the misuse of this equipment.

The mains plug used on the MiniSeal 2 unit should be fitted with the following fuse: -

Supply

230VAC

115VAC

Only refit the correct type of Fuse. Must be IEC127 approved for use in EC Countries.

Must be CSA or UL listed or recognised for use in Canada or the

Fuses Fitted in Plug

13 Ampere

No Fuses

United States of America.

MiniSeal 2 Issue 1

. Due care should be taken to

Fuses Fitted in Sealer

T5AH 250V