Aquaproducts Above GroundSwimming Pool CleanersResidential Robotic Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Aquaproducts Above GroundSwimming Pool CleanersResidential Robotic. Aquaproducts Above GroundSwimming Pool CleanersResidential Robotic 8 pages. Aboveground swimming pool cleaners residential robotic

Imprimer la page

Dear Customer,

Congratulations! You have purchased one of the best pool cleaners that

technology has to offer! Your cleaner is a fully automatic, robotic pool cleaner

equipped with the patented, powerful Jet Drive propulsion system. Please

read the following carefully so that you are fully aware of all the capabilities

and features this pool cleaner has to offer!

The "Jet", located on the top of the cleaning unit, has a patented valve mechanism that consists of just

two moving parts the valve flap and the valve lock. This Jet Valve allows the cleaner to move forwards and

backwards without the traditional wear and tear parts found in other cleaners. Although simple in appearance,

these parts are precision made and will provide many years of smooth and reliable operation. To insure the

longevity of your cleaner's valve mechanism, never stick anything forcefully into the jet valve housing.

A powerful internal Pump Motor vacuums dirt and debris into an internal reusable Filter Bag. The Filter

Bag traps dirt and debris, including minute particles as small as 2 microns in size (20 times smaller than what

the naked eye can see) allowing only microfiltered water back into the pool. The microfiltered water is thrust

outward of either Jet Port (located at each end of the Jet Valve Housing) propelling the cleaner forward similar

to the way a jetski operates.

Your cleaner has four (4) Wheels and two (2) wheel Axles like a car. Yet one Axle is able to slide forwards and

reverse in its allotted Axle Slot. The other Axle is fixed parallel to the cleaner's body. The Turning Wheel Axle

has a Locking Pin affixed to its Axle Housing. When the Locking Pin is placed in either of its allotted Locking

Pin Holes and the cleaner moves away from the Turning Wheel Axle, the Turning Wheel Axle will slide until the

Locking Pin locks one side of the axle close to the cleaner's body while the other side of the Axle freely slides

further away from the cleaner's body. This angled Axle position will turn the cleaner in an arc motion when

traveling in this direction. When the cleaner reverses, the Turning Wheel Axle will slide closer to the cleaner's

body and will remain parallel as will the Fixed Axle. In this direction the cleaner will move in a straight line (See

cleaning pattern 1 diagram).

This straight line reverse arcing movement provides the most systematic cleaning pattern of any

cleaner today, eliminating wasted time and cleaner wear and tear, while providing you with the cleanest and

healthiest swimming water in about one hour. Reverse the Locking Pin position from one Locking Pin Hole to

the Locking Pin Hole on the opposing side of the Turning Wheel Axle with each use. This will protect the

Floating Cable from twisting in this circular systematic cleaning pattern.

To become fully aware of all the capabilities and features that your pool cleaner has to offer, please

review the entire operator manual.