Burley Tail Wagon Manuel d'instruction et de sécurité du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et de sécurité du propriétaire pour {nom_de_la_catégorie} Burley Tail Wagon. Burley Tail Wagon 12 pages. Burley 2-wheel stroller kit
Également pour Burley Tail Wagon : Brochure & Specs (5 pages), Manuel d'instruction et de sécurité du propriétaire (9 pages), Manuel d'instruction et d'entretien du propriétaire (12 pages), Manuel d'utilisation et de sécurité (8 pages), Manuel d'instruction et de sécurité du propriétaire (12 pages)

Installing Light

1. Slide clip on light into bracket channel.

2. Mount light/bracket on rear side frame tube, on side

closest to traffic. Tighten bracket screw.

Note: Make sure light switch is accessible.

1. With wheel guard tube ends facing toward the wheels

(away from the trailer front), match holes in wheel guard

tube to holes in center of trailer bottom side frame.

2. Insert screws and, using provided hex key wrench, tighten

securely.

PHOTO 2

1. Rotate front tube upward and rear tube back until they

meet on plastic saddles.

2. Rotate frame locks and snap onto rear tube.

To view a video clip of "Folding a Burley" go to:

www.burley.com/support/tutorials.cfm.

WARNING

CHECK THAT THE FRAME LOCKS ARE PROPERLY ENGAGED

BEFORE USING THE TRAILER. FAILURE TO DO SO CAN RESULT IN

SERIOUS INJURY.

B U R L E Y T A I L W A G O N O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

PHOTO 1

FIGURE 1

FIGURE 2

Rear Side

of Main

Frame Tube

Light Switch

PHOTO 1:

Light mounted on rear side of main frame tube

Trailer Front

PHOTO 2:

Trailer bottom

Front

FIGURE 1

Frame Locks

FIGURE 2

Bracket

Screws

Rear

Plastic Saddles