Burley R6205A Manuel de l'utilisateur - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Burley R6205A. Burley R6205A 20 pages. Electric mixer

On / Off switch

Switching on: Press the switch (1)

Continuous running:

Press the locking knob on the switch (1) (2) to lock it in place

Switching off: Press the switch (1) briefly

Speed control: Use the speed control (3) to select the speed.

Switching between 1st - 2nd gear (4)

The switch position enables you to work at high or low speeds. The gear switch position

should only be changed when the unit is stopped, in order to prevent the gearing from being

damaged.

Ⅰ 1st gear

Ⅱ 2nd gear

Working With the Paint and Mortar

The mains plug must be disconnected before the mixing tool is changed.

The unit should be run at low speed before it is immersed in or removed from the mixture.

The speed should only be increased to maximum after it has been fully immersed in the

mixture, in order to ensure that motor is kept as cool as possible. The machine must be

moved around inside the mixing vessel during the mixing process. Continue the mixing

process until all of the mixing components have been processed.

Always clean the mixer after you have finished using it.

8. CARE AND MAINTENANCE

Remove the plug from the socket before carrying out any adjustment,

servicing or maintenance.

Your power tool requires no additional lubrication or maintenance. Always store your

power tool in a dry place.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

If a fault can not be rectified, return the mixer to an authorized dealer for repair.

Cleaning

_ Keep the safety devices, ventilation slots and Motor housing as free of dirt and dust as

possible. Clean the unit by rubbing it with a clean cloth or blow it clean using low-pressure

compressed air.

UŽÍVATEĽSKÝ MANUÁL MIEŠAČOV - MODELY R6202A, R6202B

Mixer

Page 17 of 19