Chronomite CMT-2.5 Manuel d'installation et d'utilisation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Chronomite CMT-2.5. Chronomite CMT-2.5 16 pages. Electric mini tank water heaters
Imprimer la pageMAINTENANCE INSTRUCTIONS (Continued)
Replacing the Heating Element
1. Unplug and drain the water heater (see prior instructions).
2. Remove heating element noting original positions of all connections.
3. Install new element with gasket making sure the new element and gasket are positioned
correctly.
4. Tighten retaining nuts and make the wire connections to their original locations.
Changing the Thermostat
1. Turn off the power switch and unplug the water heater from the electric outlet.
2. Drain and remove the water heater. (see page 11)
3. Remove six screws retaining the bottom panel of the water heater and remove the panel.
4. Remove thermostat knob and unscrew two retaining screws. It may be necessary to pry the
knob off of the thermostat spindle. Now remove front panel.
5. Disconnect the push-pull wire connectors on the thermostat noting which connector goes to
which terminal. Terminals are marked.
6. Remove the thermostat probe from the well.
7. Install new thermostat, attach wires and tighten screws.
Thermostat
3100-010-001
10/17 REV 1
ELECTRIC TANK WATER HEATER - POINT OF USE
TOLL FREE 800-447-4962 • LOCAL 626-937-4270 • FAX 626-937-4279
Page 12 of 16
Chronomite Laboratories is a Member of Morris Group International™
CHRONOMITE TECHNICAL SUPPORT