Aquapure MOA0.6-AD Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aquapure MOA0.6-AD. Aquapure MOA0.6-AD 8 pages. Ozone therapy machine
Imprimer la pagev
IV、 Installation and Usage
1. Take out the appliance and accessories from the package, put it on a flat ground in which space you are going to run
the appliance.
2. Connect the oxygen source to the Oxygen Input connector (O2 IN) . Make sure the oxygen filter is used to protect
the appliance for long life usage. Pure oxygen source should be used ONLY to get accurate ozone concentrations.
3. Connect the 3 way connector to the Ozone Outlet (O3 OUT)
4. Cut a short piece of silicon tubing, add one male luer lock connector to one end, then connect the side outlet of 3
way connector to the Ozone Destructor (O3 Destructor）
5. Adjust the 3 way connector, make sure the gas flow is from the Ozone Outlet (O3 OUT) to the Ozone Destructor
inlet (O3 Destructor) before switch on the appliance.
6. Connect the direct outlet of 3 way connector to the syringe or ozone bags, etc.
7. Plug in the 12V DC power adaptor to the Mains and the appliance. The "POWER" indication light is red when the
power is connected successfully.
8. Press the ON/OFF switch. The ' OZONE' indicator will be ON when ozone starts working.
9. Open the oxygen source. Check the ozone concentration chart. Turn the Adjusting Current Knob to get the ozone
concentration you need.
10. Adjust the 3 way connector, make the gas flow to the syringe or ozone bags, etc.
11. After collecting the ozone, adjust the 3 way connector, make the gas flow back to the Ozone Destructor (O3
Destructor) again.
12. Press the ON/OFF Switch and turn the appliance off.
13. Close the oxygen source, and unplug the appliance.
*NOTE:
1. For making ozonated water, it does not need the 3 way connector. Just connect the O3 Outlet Port to the ozone glass
cup inlet directly, and connect the ozone glass cup outlet to the O3 destructor.
2. The Vacuum pump is controlled by its own button 'Vacuum Switch'. Just press this switch to use the vacuum
functions when in need
OZONE THERAPY MACHINE MOA0.6-AD
BUILT-IN VC Meter and Vacuum Pump
5