Diamond ORIZ/3G Manuel - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Diamond ORIZ/3G. Diamond ORIZ/3G 12 pages.
Imprimer la page4. Replace the thermometer positioning the sensor in the same position and close it all back up.
To replace the neon inside the cabinet it is necessary to carry out the following operations:
1. After making sure you have disconnected the electrical power supply, empty the display
cabinet, removing any trays and shelves as well.
3. Replace the neon by unscrewing it from the bottom and reconnecting the cables in the same
way.
4. Reposition the covering.
To replace the power supply cable it is necessary to carry out the following operations:
2. Remove the upper cover by drawing it upwards and paying attention to the electric cables.
3. Disconnect the two power cables from the switch and the earth lead (yellow-green) from the
equipotential screw, loosen the external nut and remove the power cable. In its place insert the
new one, making it pass through the hole on the instrument panel and connecting it like the one
just removed.
4. Put the upper cover back into its original position.
FIGURES
Figure 1 - Overall dimensions
MATERIAL
F 100 T
F 120 T
F 200 T
F 100 T/L
F 120 T/L
F 200 T/L
Page 9 of 11
H (mm)
A (mm)
Steel
695
Steel
945
Steel
945
Wood
695
Wood
945
Wood
945
B (mm)
410
806
410
806
410
1006
460
818
460
818
460
1018