BURLI MAMMOTH RACK Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} BURLI MAMMOTH RACK. BURLI MAMMOTH RACK 7 pages.

MAMMOTH RACK

Step 1 – Assemble Sides

Tools Required: Adjustable Wrench, 15/16

Materials Included: Upright Posts (4), Crossmembers (4), Hex Bolt (16), Nyloc Nut (16), Washer (32)

Materials Needed: None

1. Lay Upright Posts parallel to the floor surface

1.1. Note: Place Upright Posts so holes in the foot pad of the Upright Post face out

from the side of the Upright Post that has numbers.

2. Place Crossmembers (2) between the Upright Posts as shown above.

2.1. Note: Align the bottom Crossmember in the 1

of the Upright Posts and align the top Crossmember in the 1

from the top of the Upright posts

3. Insert Hex Bolt (8) with Washer (8) through Upright Post and Crossmember with

the threaded end of the Hex Bolt facing inward.

4. Fasten Washer (8) and Nyloc Nut (8) to threaded end of each Hex Bolt using 15/16"

Socket Wrench and Adjustable Wrench.

5. Repeat Step 1 – Step 4 for the second set of Upright Posts and Crossmembers

Socket Wrench

and 4

holes from the bottom

and 4

holes