Diamond PSR 900 GE Instructions pour l'utilisation et l'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'installation pour {nom_de_la_catégorie} Diamond PSR 900 GE. Diamond PSR 900 GE 17 pages. Griddle plates
Également pour Diamond PSR 900 GE : Manuel (7 pages)

Imprimer la page

The heat release rate of the appliance is

For a use in natural gas, change the injectors. They are delivered in a small plastic

bag placed in the package.

Connect the appliance to the gas supply pipe, interposing a stop valve which enables

the appliance to be insulated from the rest of the installation.

Check the supply pressure using a manometer when all the burners are lit. It must be

equal to the indications on the rating plate.

The fresh air flow required for combustion air supply is:

- PSR 400 GE

- PSR 600 G E

- PSR 900 GE

General conditions of installation

The installation and maintenance of the appliance must be carried out in compliance

with the statutory texts and good practices in force, mainly:

General specifications

For all appliances:

Article GZ Installation with combustible gases and liquefied hydrocarbons.

Then, according to use:

Article CH Heating, ventilation, refrigeration

Air conditioning and domestic hot water steam generation.

Article GC Installation of appliances to be used for catering

Specific provisions for each type of establishment to which the public is admitted

(hospitals, shops, etc...)

Important: Never change the diameter of the injectors.

6.4 m3/h

12.8 m3/h

19.2 m3/h

PSR 400 GE

PSR 600 GE

PSR 900 GE

3.2 kW

6.4 kW

9.6 kW