Burlington T49A CHR Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Burlington T49A CHR. Burlington T49A CHR 3 pages. 65cm basin wash stand

Imprimer la page

Check that the horizontal bracket bar is vertical

using a spirit level.

Fit the two legs over the floor nipples.

Determine the final installation position and mark the

4 wall and two floor fixing hole positions in pencil.

Fix each of the two brackets onto the wall using the 4

screws provided.

Ensure that the screw heads are parallel to the floor.

2 - 3

Using a 6mm drill bit drill the six holes on the

marked positions (note: In the event that the wall /

floor fixings supplied being inappropriate for the

wall / floor, please source alternatives).

Fix the floor nipples

onto the floor.

There are 6 floor nipple

washers supplied.

These can be inserted

onto the floor nipples

to adjust for an uneven

floor.

Please refer to the BASIN INSTALLATION

INSTRUCTION for the basin installation.

Rubber washer

The 4 Rubber washers are not recommended to use

while installing the marble basin onto the standing.