Burmester 150 Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Burmester 150. Burmester 150 16 pages.

Establishing a network connection with an Ethernet cable

Router

►

Connect the Network Player to your router with an Ethernet cable.

In most cases, when using DHCP, an IP address is assigned to the

Network Player automatically.

Note:

If you have problems with establishing a network connection you can also con-

tact your Burmester dealer who would be glad to assist you with the installation.

Router

Press the OSD key on the remote control and then the buttons 7 – 8 – 9.

The LEDs on the left side of the front panel light up orange.

Press number button 2 and then the OK key.

The network scan commences and the LEDs are blinking red.

After finishing the network scan the LEDs blink alternately green and orange.

Connect your computer via Wi-Fi with your Network Player (see "Establishing a Wi-Fi

connection between Network Player and Tablet/PC/Mac" on page 13 or

"Establishing a Wi-Fi connection between Network Player and Tablet/PC/Mac" on

page 13).

Open a Web browser on your computer and type the IP address of the Network

Player (192.168.111.1) or http://networkplayer150.local into the search box.

The browser displays a list of all available Wi-Fi networks.

Click on the name of the desired Wi-Fi network.

Encoded networks will display a lock symbol. Type in the password of your Wi-Fi

router and hit accept.

Initially, the network LED will light orange. It will change to green when the

Network Player is connected to the Internet.

Network Player 150

How to connect tHe network player to a network?