Diamond BRIO64/X N Manuel - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Diamond BRIO64/X N. Diamond BRIO64/X N 12 pages. Electric fan ovens
Également pour Diamond BRIO64/X N : Installation - Use - Maintenance (11 pages), Installation - Use - Maintenance (12 pages), Installation - Use - Maintenance (12 pages), Installation - Use - Maintenance (12 pages)
Imprimer la page
PROTECTIVE
EARTH
CONNECTIONS
Connect the appliance to an efficient ground circuit.
Connect the earth conductor to the terminal with
the symbol
next to the main terminal board.
Connect the metal structure of the appliance to the
equipotential node. Connect the conductor to the
terminal with the symbol
of the rear panel.
8. COMMISSIONING
Following
installation
operations, check appliance operation. In the event
of any malfunction, consult the next Paragraph
"Troubleshooting".
ELECTRIC EQUIPMENT
Switch on the appliance as directed in the
instructions and reminders for use given in Chapter
" INSTRUCTIONS FOR USE " and check:
- the current values of each phase.
- the correct operation of the heating elements.
- The regularity that your lights are bright.
- the regularity of operation of the engine
INSTRUCTIONS FOR USE
III.
9. REMINDERS FOR THE USER
VENTILATED OVEN
Ventilated ovens are an innovatory cooking system
for food, allowing to save considerable time and
energy, without altering food features.
Thanks to the forced hot air system, the oven
reaches the required temperature in a very short
time, thus guaranteeing even cooking results, even
under full load conditions.
USING THE APPLIANCE
AND
EARTH
BONDING
placed on the outside
or
any
maintenance
READ THIS MANUAL CAREFULLY. IT
PROVIDES IMPORTANT INFORMATION
FOR SAFE INSTALLATION, USE AND
MAINTENANCE OF THE APPLIANCE.
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING FROM FAILURE TO
OBSERVING THE FOLLOWING RULES.
For after-sales service, contact technical assistance
centres authorized by the manufacturer and
demand the use of original spare parts.
The appliance is designed for professional use and
must be operated by trained personnel.
This equipment is designed for cooking food. It is
intended for industrial use. Any other use is to be
considered improper
The first time, the appliance has to be used under
no load conditions, at the highest temperature, to
eliminate any whatever traces of grease, due to
manufacturing.
Prior to using the appliance, it is necessary to pre-
heat the cooking chamber. This is an essential
operation and has to be carried out for at least 10
minutes, every time the oven is used.
Do not leave the appliance unattended while in
operation.
On mechanical models, by presetting the timer, this
automatically switches on the oven and its signal
light, the internal oven light and presets food
cooking time. For digital models, consult the specific
section.
On models " .. . U... " , a pushbutton on the control
panel will allow water supply, to increase degree of
humidity.
In the event of an appliance fault or malfunction
switch the appliance off at the main switch installed
upline.
Clean the appliance following the instructions given
in Chapter " INSTRUCTIONS FOR CLEANING".
DO NOT STORE " AMMABLE MATERIALS
IN CLOSE PROXIMITY TO THE
APPLIANCE. FIRE HAZARD.
Do not obstruct any air vents or drains present on
the appliance.
Do not tamper with appliance components.
Keep this manual in a safe place, known to all users,
so that it can be consulted throughout the working
life of the appliance.
Installation and appliance maintenance must be
carried out by qualified technicians authorized by
the manufacturer, in compliance with current safety
standards and the instructions in this manual.
14