Chrysler 200 Sedan 2012 Spécifications

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Chrysler 200 Sedan 2012. Chrysler 200 Sedan 2012 6 pages.

Imprimer la page
Chrysler 200 Sedan 2012 Spécifications
2012 Chrysler 200 Sedan

SPECIFICATIONS

The information shown is preliminary and based on data available at the time of publication.
All dimensions are in inches (millimeters) unless otherwise noted.
All dimensions are measured at curb weight with standard wheels and tires unless otherwise noted.
NOTE: Information shown is correct at time of publication and is subject to change.
GENERAL INFORMATION
Body Style
Assembly Plant
EPA Vehicle Class
Introduction Date
ENGINE: 2.4-LITER, GASOLINE, DOHC, 16-VALVE, VVT, SMPI I-4
Availability
Type and Description
Displacement
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression
Power (SAE net, estimated)
Torque (SAE net, estimated)
Max. Engine Speed
Fuel Requirement
Oil Capacity
Coolant Capacity
Emission Controls
Estimated EPA Fuel Economy mpg
(City/Hwy)
(a) Meets Federal Tier 2, Bin 5 emissions requirements and PZEV requirements in California, Massachusetts, New York, Maine, Vermont,
Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington. Meets Euro IV emissions requirements.
1 / CHRYSLER 200 SPECIFICATIONS
200
SEDAN
Four-door sedan
Sterling Heights Assembly, Michigan
Mid-size sedan
December 2010
Standard on 200 LX, Touring and Limited
Four-cylinder inline, tuned intake manifold with electronic active charge motion
control valves with dual counter-rotating balance shafts
144 cu. in. (2360 cu. cm)
3.46 x 3.82 (88 x 97)
Chain-driven DOHC, 16 valves, electronically controlled dual variable-valve
timing (VVT), direct-acting shimless mechanical bucket tappets
Sequential, multi-port, electronic, returnless
High-pressure die-cast aluminum block with dry iron liners, cast-aluminum
cylinder heads, cast-aluminum ladder frame, forged-steel crankshaft
10.5:1
173 bhp (129 kW) @ 6,000 rpm (71 bhp/liter)
166 lb.-ft. (225 N•m) @ 4,400 rpm
6,500 rpm (electronically limited)
Unleaded regular, 87 octane (R+M)/2
4.5 qt. (4.23L) SAE 5W-20
7.2 qt. (6.8L)
Single catalytic converter dual heated oxygen sensors and engine features
21 city / 30 highway with four-speed ATX
20 city / 31 highway with six-speed ATX
/
S P E C IF IC A T IO N S
http://media.chrysler.com
(a)