Aquasana EQ-1000 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Aquasana EQ-1000. Aquasana EQ-1000 16 pages. Whole house water filter
Également pour Aquasana EQ-1000 : Manuel d'installation (5 pages), Manuel du propriétaire (16 pages)

Imprimer la page

SYSTEM CONFIGURATION

If you have added components to your Rhino

(Installation shown below includes Professional Grade Install Kit)

10" Pre-Filter

(EQ-300 and

EQ-600 only)

20" Pre-Filter

(EQ-1000 and

Pro Kit only)

Salt-Free Water

Conditioner

(Optional)

Before installing

• Lay out system in appropriate configuration. Improper sequence

of equipment will affect performance, and could possibly damage

your system.

• For all installations: Anticipate the need for additional parts and pieces

including but not limited to pex tubing, clamps and mounting screws to

install unit properly (available at a local home improvement stores or

through your plumbing contractor). Due to the varieties of home design,

not all configurations can be addressed in this guide.

• DO NOT install this filter where the line pressure may exceed 100 psi.

The operating pressure range for this filter is between 20psi – 100psi.

• Install on cold water lines only (40° – 90°F).

• Installation of the filtration system must comply with existing state and

local plumbing codes. Aquasana and its manufacturer are not liable for

consequential or incidental damages due to improper installation.

• DO NOT install the unit on its side. It must be installed upright

to maximize contact with media bed.

note the correct sequencing below.

Water Filter System,

10" Post-Filter

(Optional)

Rhino

Water

Filter System

UV Filter

(Optional)