Aquasana WELL WATER Rhino EQ-WELL-UV Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Aquasana WELL WATER Rhino EQ-WELL-UV. Aquasana WELL WATER Rhino EQ-WELL-UV 12 pages. Whole house water filter
Imprimer la page
2
SYSTEM CONFIGURATION
2
If you have added components to your Rhino
(Installation shown below includes Professional Grade Install Kit)
20" Pre-Filter
Salt-Free Water
Conditioner
(Optional)
Before installing
• Lay out system in appropriate configuration. Improper sequence
of equipment will affect performance, and could possibly damage
your system.
• For all installations: Anticipate the need for additional parts and pieces
including but not limited to pex tubing, clamps and mounting screws to
install unit properly (available at a local home improvement stores or
through your plumbing contractor). Due to the varieties of home design,
not all configurations can be addressed in this guide.
• DO NOT install this filter where the line pressure may exceed 100 psi.
The operating pressure range for this filter is between 20psi – 100psi.
• Install on cold water lines only (40° – 90°F).
• Installation of the filtration system must comply with existing state and
local plumbing codes. Aquasana and its manufacturer are not liable for
consequential or incidental damages due to improper installation.
• DO NOT install the unit on its side. It must be installed upright
to maximize contact with media bed.
note the correct sequencing below.
Rhino
Filter System
Water Filter System,
®
10"
Post-Filter
Water
®
UV
Filter