Aquasana EQ-AST-WH Manuel du propriétaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Aquasana EQ-AST-WH. Aquasana EQ-AST-WH 12 pages. Whole house salt-free water conditioner
Également pour Aquasana EQ-AST-WH : Instructions d'installation (5 pages), Manuel du propriétaire (12 pages)
Imprimer la page
3
Prepare Salt-Free Water Conditioner
Wrap your pipe nipples with NSF
certified plumber's tape. Connect the
nipples to the system's inlet and outlet.
NOTE: DO NOT use pipe solvent
(dope), as solvents in some types
of pipe dope may cause damage to
plastic fittings. Do not over-tighten
to prevent damage to filter head.
4
COPPER PIPES ONLY (proceed to Step 5 for PVC Pipes)
When installing on metallic plumbing,
ensure you take the following precautions.
Securely install two (2) grounding clamps
and a #4 copper wire (not included) across
the location where the system will be
installed. Tightly clamp at both ends,
as shown in the illustration.
WARNING
ELECTRICAL SHOCK HAZARD
Prior to installation on metallic
plumbing, securely install two
grounding clamps and a #4 copper
wire per installation instructions.
Failure to follow these instructions
can result in death or electric shock.
INSTALLATION STEPS
Ground Wire
Ground
Clamp
5
Ground
Clamp