Burndy BKOS5290 Fiche d'instruction

Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} Burndy BKOS5290. Burndy BKOS5290 2 pages. Self-contained hydraulic knockout set

Imprimer la page
I
MPORTANT RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage
is found, notify carrier at once. Shipping damage is NOT covered by warranty. The carrier is responsible for all repair or
replacement costs resulting from damage in shipment.
I
MPORTANT — USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to
select the proper components and design to insure appropriate integration with your operations and existing equipment and
that all safety measures have been taken to avoid the risk of personal injury and property damage from your application
or system.
FCI CANNOT BE RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE USE, MAINTENANCE OR
APPLICATION OF ITS PRODUCTS. Please contact FCI for guidance when you are in doubt as to the proper safety
precautions to be taken in designing and setting up your particular application.
To prevent injury keep hands away from the punch and die while punching holes. Always wear
WARNING
!
approved eye protection.
Avoid dropping the cylinder. During punch operation, support the cylinder to prevent it from
falling after punching is completed.
To prevent thread damage, be sure punch is threaded onto the stud until the stud extends
beyond the punch. Make sure all rods, studs and punches are secured before operating
hydraulic driver.
Do not operate near live circuits. Contact with live circuits can cause injury or death.
Never exceed rated capacity of the tool. Use this tool for its intended use only.
Never operate the pump lever after the ram motion stops. Continued operation after ram motion
stops will damage driver and could result in injury.
Note: Inspect tool and components for wear & damage. Replace worn, damaged, or missing components with genuine
FCI replacement parts. To ensure ease of assembly & operation, keep all threads clean & lightly oiled.
BKOS5290
Features
• Four-point punches for easy slug removal.
• Right-angle head swivels 360
in tight work spaces.
BKOS5290 Kit Components:
Model
BKLP6
BKPR7520
BKPS50
BKSA50
BZ88010
BKP500B
BKD500B
BKP750B
To Protect Your Warranty, Use Only FCI Burndy
Instruction
1
⁄
" - 2" Self-Contained Right-Angle Hydraulic Knockout Set
2
o
for flexible punching
Description
Hydraulic Driver
Pull Rod
Pull Stud
Pull Stud Adapter
Storage Case
1
⁄
" Punch
2
1
⁄
" Die
2
3
⁄
" Punch
4
Sheet
1
• Punches up to 2-
⁄
2
stainless or 10-gauge mild steel.
• Compact, lightweight size: 7
• Operating pressure rated at 10,000 psi.
Model
BKPD750B
BKP1000B
BKD1000B
BKP1250B
BKD1250B
BKP1500B
BKD1500B
BKP2000B
BKD2000B
BKOS5290
SELF-CONTAINED
HYDRAULIC
KNOCKOUT SET
" conduit sizes in up to 12-gauge
1
⁄
pounds and 13" long.
2
Description
3
⁄
" Die
4
1" Punch
1" Die
1
1-
⁄
" Punch
4
1
1-
⁄
" Die
4
1
1-
⁄
" Punch
2
1
1-
⁄
" Die
2
2" Punch
2" Die
Alfluid™.
®