Diamond RFE 12 Instructions pour l'utilisation et l'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'installation pour {nom_de_la_catégorie} Diamond RFE 12. Diamond RFE 12 13 pages.

Imprimer la page

b) First starting:

Before the first use, wash the machine and all accessories with hot soapy water and dry them

with a soft cloth.

Connection of the device

- Check that the tension and the frequency of the electricity network suit to the values indi-

cated on the descriptive plate.

- Check that neither the cord nor the plug are damaged

- Make sure that every control knob is positioned on 0.

- Unwind completely the electric power cable and connect it in a plug connected with the

earth.

- The device is connected.

The machines intended to be linked in a permanent way with the fixed pipes must be provid-

ed with a device of disconnection.

The equipotential connection marked by this symbol

equipotential conductive connection of your installation.

NB: in case of connection of the device in a plug without earth protection or directly on the

electricity network, confide its connection to a qualified person .

c) Use of device :

Command and display

Thermostat (n°3 on picture)

Tripolar safety thermostat

Microswitch

Commutator (n°4 on picture)

Orange pilot light (n°1 on picture)

Green pilot light (n°2 on picture)

Putting on

- Make sure that the draining tap is closed.

- Insert the control unit into the slot being sure that it is pushed in all the way. The deep

fryer will not function if the control unit is improperly inserted, the microswitch will

prevent operation.

Function

Temperature setting

Automatic stop in case of overheating

Automatic stop in case of improper posi-

tioning of the control unit

On/off. It is linked to thermostat

Oil is warming (pilot light on)

Oil is hot (pilot light off)

Machine is on (pilot light on)

Machine is off (pilot light off)

must be linked with the