AQUASCAN INTERNATIONAL CSE Series Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AQUASCAN INTERNATIONAL CSE Series. AQUASCAN INTERNATIONAL CSE Series 20 pages.

Imprimer la page

The Registration Unit(s) is first connected to the Control Unit. The system is then turned on by

pressing the On/Off button.

Note! It is important that the connections are carried out in this order.

AquaScan

Fishcounters

After approx. 10 sec. the Control Unit will show which Registration Units it has contact with, and

how much of program transfer that has been finished:

C1234: WAIT...

will be shown if the Control Unit does not encounter any Registration Unit.

The following will be showed when the program transfer is finished:

WEIGHT(g) Cx:

Alternatively, if you wish to use the previous size for a channel (NOTE: same cage or tank) you don´t

need to give the average weight. This may also be used if a power loss has occurred. To resume

counting press Enter only and the display will show:

AquaScan User's Guide

version: 4.00 Model: KE-series

This example shows that all channels are connected.

The program transfer normally takes ca. 30sec. The message NO COUNTERS

x may be 1,2,3 or 4. C1, C2, C3 and C4 are related to the inputs at the Control

Unit.

For each channel type the average weight in gram for the fish to be counted in

The given channel and press Enter

given by the operator the channel will be calibrated at the start of the count.

(Enter/Yes)

Start Cx

:(number)

Press Y

(Enter/Yes)

Press N

(Delete/No)

Page 4 of 20

. When the average weight is

Y/N

and start will be from last number.

and start will be from 0.