Panasonic AG-DVX100A - Pro 3-CCD MiniDV Proline Camcorder Menu Information - Page 12
Parcourez en ligne ou téléchargez le pdf Menu Information pour {nom_de_la_catégorie} Panasonic AG-DVX100A - Pro 3-CCD MiniDV Proline Camcorder. Panasonic AG-DVX100A - Pro 3-CCD MiniDV Proline Camcorder 13 pages. Mini-dv camera-recorder (ntsc)
Également pour Panasonic AG-DVX100A - Pro 3-CCD MiniDV Proline Camcorder : Brochure & Specs (12 pages), Spécifications (12 pages), Brochure & Specs (13 pages)
Imprimer la page
Setting menus
OTHER FUNCTIONS screen
Item/
Description of settings
(display mode)
BEEP SOUND
For setting the beep tone to ON or OFF.
(Camera)
OFF
ON
When ON is selected as the setting, the
beep tone is sounded at the times given
below.
O When the beep tone is sounded, the
audio signals from the output connectors
are muted, and the beep tone is output
instead.
[Beep tone sounds once]
OWhen the POWER switch has been set
to ON
OWhen shooting has commenced
[Beep tone sounds twice]
OWhen shooting has been temporarily
stopped
[Beep tone sounds 10 times]
OWhen the cassette tape has not been
inserted
OWhen the cassette tape is in the
recording pause mode
OWhen condensation has formed inside
the camera recorder
OWhen a problem has occurred in the
camera recorder
CLOCK SET
For setting the internal calendar of the
(Camera)
camera recorder.
(VCR)
TIME SHIFT
For adding the time which was set using
(Camera)
this item to the time of the internal calendar
(VCR)
(to compensate for time differences) for
display in the viewfinder and on the LCD
monitor.
The
compensation is also recorded on the tape.
+23h --- +1h, OFF, –1h --- –23h
(In 1-hour increments)
TAPE PROTECT
When the camera recorder is left on
(Camera)
standby for about 5 minutes in the shooting
pause mode, it is automatically set to the
tape
protection
protection mode is to be established is
selected using this item.
POWEROFF: The camera recorder's power is
set to the OFF mode.
STBY: The cylinder head is set to the stop
mode.
USER FILE
LOAD: The settings stored last in the user
(Camera)
file are loaded.
(VCR)
SAVE: The user file settings which have
been changed are saved.
INITIAL: The user file settings are restored
to the factory settings.
O When the LOAD or INITIAL operation
has been performed, set the POWER
switch on the camera recorder to OFF
and then to ON again in order to enable
the settings.
HOUR METER
For indicating the total rotational time of the
(Camera)
cylinder head (5-digit display in 1-hour
(VCR)
increments).
50
clock
time
after
the
mode.
Which
tape
The underlining indicates the factory setting.