Panasonic AG-HCK10 Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic AG-HCK10. Panasonic AG-HCK10 11 pages. Camera cable
Également pour Panasonic AG-HCK10 : Spécifications (2 pages), Manuel de l'utilisateur (4 pages), Fiche technique (3 pages)
Imprimer la page
■
Shooting by hand
When holding the camera head by hand for shooting, make sure that your hand does not cover the air
inlet, air outlet or built-in microphone.
Air outlet
•
Make sure that your hand does not cover the camera head's heat dissipation outlet or built-in
microphone.
■
Mounting on a tripod
Attach the tripod to the camera head's tripod mounting hole.
•
The depth of the tripod mounting hole is 5.5 mm. Do not force the screw beyond this depth when
attaching the camera head to a tripod. You may damage the camera head if you use any screw other
than 1/4-20UNC.
Beware of the following if fixing the camera head to something other than a tripod.
•
Fix the camera head securely with vinyl tape or something similar to make sure that it does not wobble.
* Do not use tape that has a strong adhesive, because it may peel off the paint.
•
Do not cover the camera head's air inlet, air outlet or built-in microphone with the material that you use
for fixing the camera head.
•
If you hold the camera head as shown in the examples below, the cable and connector will be
subjected to a large load and may be damaged.
Further, the cable may disconnect and the camera head may fall, or the camera head may hit a
surrounding object such as a wall, resulting in damage.
Holding or fixing by the cable only
Built-in microphone
Air inlet
Tripod mounting
hole
Suspending the camera head while
holding the cable only
9