Panasonic AG-HMC150 Menu Information - Page 12
Parcourez en ligne ou téléchargez le pdf Menu Information pour {nom_de_la_catégorie} Panasonic AG-HMC150. Panasonic AG-HMC150 20 pages. Avchd camcorder
Également pour Panasonic AG-HMC150 : Brochure & Specs (8 pages), Brochure & Specs (12 pages), Brochure (16 pages), Manuel du produit (22 pages), Instructions de base (20 pages), Manuel de l'utilisateur (35 pages)
Imprimer la page
Setup menu list (continued)
TC/UB SETUP screen
Item
TC MODE
(Camera)
TCG
(Camera)
TC PRESET
(Camera)
UB PRESET
(Camera)
EXT TC LINK
(Camera)
92
Display
mode
Selects the correction mode of the internal time code generator when the time
code of the internal time code generator is recorded.
DF:
Uses the drop frame mode.
NDF:
Uses the non-drop frame mode.
•
TC MODE is automatically set to NDF when you set recording frame rate of
recording format to 24P.
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation mode.
REC RUN:
Sets the initial time code.
YES NO
•
Set the frame value to 0 or a multiple of 4 when you set recording frame rate
of recording format to 24P. If any other value is set, the recorded time code will
mis-match.
Sets the user information.
YES NO
Synchronizes the initial time code value during multi-camera shooting. (Slave
camera time codes are synchronized to the master internal TCG value.)
(Page 55)
MASTER: Sets the mode to master mode.
SLAVE:
Sets the mode to slave mode.
When the COUNTER - RESET/TC SET button is pressed, input time
codes are synchronized to the internal TCG.
NO:
Returns to the last screen.
•
Master and slave mode settings are only in effect when this menu is open.
When the menu is closed, EXT TC LINK is automatically canceled.
Description of settings
A slight time error may occur when switching to PB mode if the
frame rate is set to 24P.
The time code is advanced only when recording.
indicates the factory setting.