AquaScape AquaBasin 98135 Manuel d'installation et d'entretien - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} AquaScape AquaBasin 98135. AquaScape AquaBasin 98135 12 pages.

Imprimer la page

AquaScape AquaBasin 98135 Manuel d'installation et d'entretien

5) Now that everything is

in place, you can ﬁnish

covering the top of the

AquaBasin

™

(Fig. 10)

How to Hook Up a Decorative Spitter

1) The AquaBasin

grates for easy pump access. Connect the tubing to the

Ultra pump and ball valve using the clamps supplied from

the AquaBasin

or #98138 sold separately) and then place the pump and

plumbing inside the AquaBasin

can be run out the notch in the side of the AquaBasin

(Fig. 6 & 7)

2) The AquaBasin

recessed area. This gives you the option of running the

tubing to the most convenient location. If you are not using

the center hole, cover it up with a few 3"-4" stones so that

smaller gravel will not fall through.

3) Next, place the spitter on the AquaBasin

the tubing to the spitter with the supplied clamp from the

AquaBasin

™

#98138, or #98377 sold separately). (Fig. 11) The Aqua-

Basin

is designed with an 18" wide recessed area in the

™

middle. Depending on the decorative piece being used, this

recessed area will allow you to backﬁll with gravel around

the decorative piece giving it a more stable platform to sit

on. It is recommended that tall or oddly

shaped pieces be set in the middle and

backﬁlled with gravel to prevent the

piece from falling over.

4) If you do not have to backﬁll around the

decorative piece simply ﬁll the recessed

area in with gravel in order to make the

fountain level with the top of the basin.

(Fig. 7)

5) Now that everything is in place, you can

now ﬁnish covering the top of the Aqua-

Basin

with gravel. (Fig. 12)

™

with gravel.

is designed with two removable

™

Ultra

Pump Kit (items #98136, #98137,

™

is designed with several holes in the

™

Ultra

Pump Kit (items #98136, #98137,

™

Fig. 9

. The cord from the pump

and connect

™

Fig. 13 The AquaBasin™ is designed with two supports

in the middle to help support heavier pieces.

™

Fig. 10

Fig. 11

Fig. 12