AquaScape MEDIUM AQUABASIN Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} AquaScape MEDIUM AQUABASIN. AquaScape MEDIUM AQUABASIN 20 pages.

Imprimer la page

I N S T A L L A T I O N

1. Place basin in desired location and outline area to be excavated.

3. Place basin in hole and level front to back and side to side. Leveling

sand may be required.

5. Place paver sand up to top of basin and compact.

Note: If installing bubbling fountains into a permeable paver patio

and filling the voids between paver blocks, use the micro-grid

geotextile layer (included) beneath the pavers sitting directly on top of

the basin. A small slit will need to be cut in the center of the geotextile

layer to allow pump plumbing to pass through and provide access to

the pump.

☎

US 1-866-877-6637 |

I N S T R U C T I O N S

2. Excavate an additional 4-6" below excavation for paver base

depending on soil conditions. Compact bottom of hole to prevent

any unnecessary settling. Note: If installing directly into the ground,

excavate hole 16" deep, compact base, level unit, and back fill around

all sides

4. Place paver base around basin leaving approximately 1" from top of

basin and compact.

6. Place pump in bottom of the basin.

☎

CAN 1-866-766-3426 | www.aquascapeinc.com