AquaScape 45009 Instructions et entretien - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions et entretien pour {nom_de_la_catégorie} AquaScape 45009. AquaScape 45009 20 pages. Adjustable flow pond pump
Également pour AquaScape 45009 : Instructions et entretien (20 pages)
Imprimer la page
• Always operate the pump fully submerged; or if using
in-line ensure a constant source of fresh water. Failure to
do so may overheat the pump and cause it to fail, voiding
the warranty.
• Use only in fully assembled state, paying particular
attention to ensure that both the outer and inner filter
screens are attached to the pump. Failure to operate the
pump without the filter screen will allow large debris to
enter the pump and cause the pump to fail, voiding the
warranty.
• Do not wear loose clothing that may become entangled in
the impeller or other moving parts.
• Keep clear of suction and discharge openings. DO NOT
insert fingers into pump with power connected.
• Do not pump hazardous materials or liquids, such as oil,
saltwater or organic solvents.
• Do not block or restrict discharge.
• Products returned must be cleaned, sanitized, or
decontaminated, as necessary, prior to shipment to ensure
Model Number
Item Number
Average Pond Size Recommendation
Maximum Flow Rate
Maximum Head Height
Motor Type
Wattage
Amperage
Power Cord Length
Discharge Hose Diameter
Warranty
*Wattage range depending on remote control flow setting
Installation
• Do not submerge
AquaSurge Adjustable Flow
Pond Pump directly into
the pond. The AquaSurge
Adjustable Flow Pond Pump
is designed to be placed
inside a skimmer, Pondless
vault, sump or basin. Please
consider the Aquascape
AquaForce
Solids-
®
Handling Pond Pump if your
application does not have a filter and requires a pump that
can be placed directly into the pond (Ex. 1).
4
AquaSurge Adjustable Flow Pond Pump Specs
2000-4000
2000-4000 US Gallons
Asynchronous
180 - 215*
1", 1.25", 1.5", 2"
3 Year Limited
AquaForce Pond Pump
®
Ex. 1
that employees will not be exposed to health hazards in
handling said material. All applicable laws and regulations
shall apply.
IMPORTANT: Aquascape, Inc. is not
responsible for losses, injury, or death
resulting from a failure to observe these safety
precautions, misuse or abuse of pumps or
equipment.
AquaSurge Pond Pump Specifications
• Input Voltage: 120V AC
• Input Frequency: 60 Hz
• Submersible pump
• For outdoor or indoor use
• Thermally protected
• This pump has been evaluated for use with water only
• Input Amps & Wattage
45009
3,947
18.5'
1.82
20'
• The AquaSurge Adjustable Flow Pond Pump is designed
to be installed horizontally on the vibration and noise
reducing rubber feet. The pump can also be mounted
vertically, if needed, by attaching the filter stand ring on the
outer filter screen, included with your pump (Ex. 2).
☎
☎
US (866) 877-6637 |
4000-8000
45010
4000-8000 US Gallons
7,793
28'
Asynchronous
500 - 660*
5.5
20'
1", 1.25", 1.5", 2"
3 Year Limited
OR
CAN (866) 766-3426 | aquascapeinc.com
Ex. 2