Diamond RED07/35 Référence rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} Diamond RED07/35. Diamond RED07/35 5 pages.

Imprimer la page
Control
panel
7
5
8
11
14
15
16
12
11
13
End of cooking
time buzzer
Press key (19) when the oven is on.
The time before intervention of
the "buzzer" will appear on dis-
play (11) and the countdown will
activate.
If you wish to modify the time, use
keys "+" (12) and "-"(13) .
ATTENTION:
A - Never switch the oven off using the ON/OFF button
(20) whilst the refractory surface is rotating.
Always bring the joystick (4) back to its central posi-
tion.
B - The light automatically goes out when the oven is
switched off!
C - During pyrolysis, turn off the light in order to pre-
serve bulbs. The programme P99 (which cannot be
modified by the user) is already set to carry out py-
rolysis and automatically switches off the light!
Key (17) can be used to control the light.
Quick reference Giotto - IT/UK/DE 05-12
Giotto
Quick reference
6
17
4
9
10
18
21
19
12
13
20
21
12
11
19
13
Countdown
automatically turns
Press key (19) with the oven
turned off.
The time remaining before the
oven is due to turn itself on will
appear on display (11);
to modify the time, use keys "+"
(12) and "-" (13).
Should you wish to exit the func-
tion and cancel the countdown,
press key (19) once again or key
(20) to turn on the oven.
17
9
8
10
Selection mode
By pressing the light keys (17)
and hood light (18) key at the
same time, you will enter the pro-
gramme selection mode;
display (8) presents the letter
"P" followed by a number in the
range of 00 to 99.
Using keys (9) and (10), it is pos-
19
sible to select the programme
number; confirm with hood light
key (18).
To change the program, press
20
keys "+" (9) and "-" (10).
These changes are "temporary".
To "permanently" set the param-
eters of the programmes, press
light keys (17) and hood light
key (18) at the same time, with
the oven turned off.
Select the number of the pro-
gramme to be changed; confirm
with the hood light key (18).
To change the parameters of pro-
gramme, press keys "+" (9) and
"-" (10).
Save the changes made using the
hood light key (18).
D - Regularly remove the refractory bricks from the
cooking surface and clean the burn residues from
the base.
E - Disconnect the electrical power supply before car-
rying out any operations to the electrical controls
and before replacing the light bulbs.
F - Never work without using protective glass of the
lamp; if it should break, replace it immediately.
G - RISK OF FIRE!
Every 3 months, open the control unit and carefully
vacuum any flour or dust deposits!
5
18
Trouble shooting
Fault or malfunction:
The following error messages will
appear on the board display:
E_1 :
thermocouple upper heating ele-
ments fault.
E_2 :
power board heatsink probe fault
or high temperature warning.
E_3 :
control board cold junction probe
fault or high temperature warn-
ing.
E_4 :
thermocouple lower heating ele-
ments fault.
AL1 :
pre warning of high power board
temperature.
AL2 :
warning of high control board
temperature.
NOTE:
E : oven turns off.
AL : oven continues cooking.