AquaScape BIOFALLS 1000 Instructions et entretien - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions et entretien pour {nom_de_la_catégorie} AquaScape BIOFALLS 1000. AquaScape BIOFALLS 1000 16 pages.
Également pour AquaScape BIOFALLS 1000 : Instructions et entretien (16 pages)

Imprimer la page

AquaScape BIOFALLS 1000 Instructions et entretien

STEP 6

BRING IN THE TOPSOIL

• Add topsoil to the berm and surrounding area in order to

provide a good substrate for future landscape planting.

STEP 7

BUILD THE RETAINING WALL

• Finish off the berm where the BioFalls

building a small retaining wall out of boulders. This step

may or may not be needed, depending on the size of the

berm and the transition into the existing landscape.

www.aquascapeinc.com |

is buried by

CAN 1-866-766-3426 |

STEP 8

PLUG IN AND TWEAK THE WATERFALLS

• As soon as the pond is ﬁ lled and all of the Pond & Waterfall

Foam is dry, you may plug the pump in and test the

waterfall.

WARNING

Any electrical should be plugged into a GFCI rated

receptacle.

• You can tweak the waterfall ﬂ ow by placing smaller stones

and gravel on the waterfall cascades. This will change the

appearance and sound of the water. Have fun playing with

the ﬂ ow of water coming over the falls until you achieve the

desired effect.

STEP 9

TRIM THE LINER

With everything running, go around the perimeter of the

pond with a pair of scissors and trim off any excess liner,

always leaving several inches above the water level as a

precaution. The remaining liner edges can be covered with

gravel.

NOTE: Do not trim the liner until the waterfall is running and the

pond is ﬁ lled to the desired level. Prematurely trimming the liner

may cause leaks!

Trim off any excess liner.

STEP 10

MULCH THE BERM

• The entire area surrounding the BioFalls

mulched and any surrounding plants added.

US 1-866-877-6637

Cover remaining liner edges with

gravel.

can now be