AquaScape 84057 Manuel d'instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} AquaScape 84057. AquaScape 84057 6 pages. Color-changing lights
Également pour AquaScape 84057 : Manuel d'instructions d'installation (6 pages)
Imprimer la page
Model
Dimensions
Voltage Min-Max/Tensions Min-Max
Wattage
Lumens
Kelvin Temperature
Color Rendering Index
Beam Angle Spread
Cord Length
Installation
MOUNTING OPTIONS
• Choose the option that works best for each light.
– Removable mounting stand (#84059 and #84060 only)
Remove the threaded nut from the fixture holder and insert holder
into the base. Use the threaded nut to secure the fixture holder
(Ex. 1).
– Landscape stake (#84059 and #84060 only)
Remove the threaded nut from the fixture holder and thread the
stake clockwise into the bottom of the fixture holder (Ex. 2).
– No stand or stake
The lights can be used
without the fixture holder
to allow the fixture to be
disguised between rocks
(Ex. 3).
– Adjusting the light angle
To adjust the angle, push
up or down on the fixture
holder until it "clicks" into the
desired position (Ex. 4).
– Waterfall and Up Light Base (#84057 only)
The pre-installed stand can be removed for installation in tight
spaces (Ex. 5).
2
2-Watt Color-Changing Waterfall Light
2" diameter x 1.25"H
10.8V-15V
2±10%
52 lm (white)
3,000 K (white)
70 (white)
30°
15'
Ex. 1
Ex. 4
Color-Changing Lighting Specs
4.5-Watt Color-Changing Spotlight
3" diameter x 3"H
10.8V-15V
4.5±10%
128 lm (white)
3,000 K (white)
70 (white)
CONNECT LIGHT FIXTURES
• Aquascape color-changing lights include 5-pin, quick-connect fittings
to provide tool-free electrical
connections.
WARNING: Do not cut or
remove the quick-connect
fitting or isolation chamber,
as it will damage the light and void
the warranty (Ex. 6).
• Color-changing splitters and
extension cables are available
to install multiple lights. See the
recommended products section for available extensions and splitters.
• Connect lights to Aquascape color-changing splitters and extensions
(Ex. 7).
NOTE: Quick-connect connections must be fully tightened to prevent
water from entering. Dielectric grease, available at most home
Ex. 2
improvement stores, can be used in all connections to further prevent
water infiltration.
• For installations with existing low-voltage lighting or components, split
the power after the transformer, before the color-changing lighting control
hub, to run color-changing light off the existing transformer (Ex. 8).
Ex. 3
WARNING: Do not submerge quick-connect fittings, as moisture
entering the connections will damage the lights.
SMART CONTROL HUB INSTRUCTIONS
• The Aquascape Smart Control Hub is required to power and control
Aquascape color-changing lights.
Ex. 5
☎
US (866) 877-6637 |
8-Watt Color-Changing Spotlight
3" diameter x 3"H
223 lm (white)
3,000 K (white)
30°
15'
to color
lights
Ex. 7
☎
CAN (866) 766-3426 | aquascapeinc.com
10.8V-15V
8±10%
70 (white)
30°
15'
Ex. 6
to white
lights
Ex. 8