Chuango PIR-926 Manuel de l'utilisateur
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Chuango PIR-926. Chuango PIR-926 2 pages. Solar-powered dual-tech motion detector
Également pour Chuango PIR-926 : Manuel de l'utilisateur (18 pages)
Imprimer la page
®
CHUANGO
\
Solar-Powered
Dual-Tech
Motion Detector
PIR-926
User Manual
Introduction
PIR-926 is a solar-powered motion detector utilizing a single
passive infrared element and microwave technology. It consists of
digital dual-core fuzzy logic infrared control chip and intelligent
analysis which effectively identify interference signal from body
movement signal and reduce false alarm. The detector is battery
powered and kept re-charging by the solar panel to save energy.
Unique housing material and structure improves waterproof level
for outdoor use. Only after being connected successfully with
alarm system, the detector can work normally.
Features
1. Accurate detection
It has microwave and infrared dual detections to prevent false
■
alarm.
It consists of digital dual-core fuzzy logic infrared control chip and
■
intelligent analysis which effectively identify interference signal
from body movement signal.
■
With automatic temperature compensation and anti-air
turbulence technology, it easily adapts to environmental changes.
2. Outdoor use
It adopts ABS and anti-UV material for outdoor use with IP65
■
rating.
3. Energy saving
■
Rechargeable by solar power.
■
Energy saving mode to reduce battery charging times, extending
battery life.
Q
□
Product Overview I
LED Indication
LED Status
Red and orange LED flash
continuously for lmin
Red LED flashes once
Orange LED flashes once
Red and orange LED flash
once at the same time
Red LED flash 3 times
every 12 seconds
Fixing Screw
Attachment
Detector
Installation Bracket
Meaning
Self-testing
Infrared is triggered
Microwave is triggered
Both infrared and microwave are
triggered, the detector sends
alarm signal.
Low battery, please install on
place with sufficient sunlight
PCB Layout
0
CD LED On/Off
0 Working Mode
_
_
_JL
Setting
(j) Battery
(
_.--
,
0
1. LED options: ON/OFF (default setting is ON).
Bracket
2. Working mode options: lOS= Test mode, 5MIN=Power saving
mode (default setting is test mode).
3. Battery: One piece of 18650 rechargeable lithium battery.
4. Microwave sensitivity adjustment options: HIGH, MEDIUM, LOW.
(default setting is medium).
5. Tamper switch: In working state, if the housing is opened, detector
will send alarm signal.
6. Zone mode options: Normal zone, home zone, 24-H zone
(default setting is normal zone).
Normal zone:
In arm or home arm state, the detector set at normal
zone will trigger an alarm once intrusion is detected.
Home zone:
In home arm state, the detector set at home zone is
disarmed.
24-H zone:
The detector set at 24-H zone will trigger an alarm
once intrusion is detected, no matter the system is armed or
disarmed.
Detection Scope
�•
Top,iew
0
@ Microwave Sensitive Adjustment
® Tamper Switch
® Zone Mode Setting
__,
�II
Side view