AQUASOL AB-T-TDS Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AQUASOL AB-T-TDS. AQUASOL AB-T-TDS 6 pages. Table top meters

Imprimer la page
5. Instrument Settings :
5.1 Steps to Change Parameter Setting
Press "SET" to enter Setting Mode.
Press "UP" or "DOWN" to select parameter from P1 to P14.
Press "OK" to enter Parameter Setting.
Press "UP" or "DOWN" to select value and Press "OK" to confirm.
Press "ESC" to return to Measurement Mode
5.2 Setting Parameter and its Functions
Code
Parameter Setting
P1
Export Data to USB
P2
Date and Time
P3
Clear Stored Records
P4
Temperature Unit Selection
P5
Display Machine Code
P6
Android App Authorization Code
P7
Restore to Factory default
P8
Manual Temperature Compensation Value
P9
Bluetooth Mode Selection
P10
Electrode Coefficient Value
P11
Electrode Coefficient Range
P12
Standard Solution Selection
P13
Temperature Compensation Coefficient Value
P14
Datum Temperature Value
8
P1 - Export Data to USB
This setting will transfer Data from Meter to USB disk in Excel Format (If no
USB is detected Meter will prompt ERROR)
a) In Setting Mode select "P1" and press
USB.
b) Press "ESC" and Exit settings.
P2 - Set DATE and TIME
This setting will set Date and Time
a) In Setting Mode select "P2" and press "OK" to change Date an Time.
b) Press "UP" or "DOWN" to change values, Press "LEFT" or "RIGHT"
to shift between variables.
c) Press "OK" to Confirm and "ESC" and Exit settings.
P3 - Clear Records
This setting will delete Stored values in the Meter
a) In Setting Mode select "P3" and press "OK" to Clean records.
b) Press "UP" or "DOWN" to select record and press "OK" to Clear
Value.
c) Press "ESC" and Exit settings.
P4 - Temperature Unit
This setting will select Temperature Unit Deg C or Deg F
a) In Setting Mode select "P4" and press "OK" to select unit.
b) Press "UP" or "DOWN" to select unit and press "OK" to confirm.
c) Press "ESC" and Exit settings.
P5 - Display Machine Code
This setting will display 4-digit Machine Code, used for Bluetooth paring.
a) In Setting Mode select "P5" and press "OK". Machine Code will be
displayed.
b) Press "ESC" and Exit settings
"OK"
. Data Will be copied to
9