Panasonic WV-SP105 Manuel d'installation - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Panasonic WV-SP105. Panasonic WV-SP105 36 pages. Ip video cameras
Également pour Panasonic WV-SP105 : Spécifications (2 pages), Spécifications (2 pages), Fiche technique (2 pages), Tableau de comparaison (6 pages), Note d'intégration (8 pages)

Remove the angle adjustment cover

After determining the installation angle of the camera, remove the angle adjustment cover. Make

sure the camera is secured to the camera mount bracket, and place the sticker (accessory) over

the tripod screw hole on which the hook of the angle adjustment cover was put.

Secure the safety wire on the ceiling or wall

Secure the safety wire to the foundation part of the construction or a part with adequate strength

(minimum pull-out strength 196 N {44.06 lbf}).

Prepare the fixing screw according to the material of the area where the safety wire is to be fixed.

For mounting on ceiling, use the safety wire (accessory), washer (accessory) and spring washer

(accessory). For mounting on wall, use a safety wire kit (locally procured).

Important:

• The safety wire shall be adjusted to remove slack.

• Be sure to install the safety wire to prevent a fall of the camera resulting in injury or accidents in

case the camera comes off.

• To prevent the mounting strength from becoming lower, do not use wooden screws to secure

the safety wire.