Panasonic WV-SW395 Manuel d'installation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Panasonic WV-SW395. Panasonic WV-SW395 40 pages. Ip video cameras
Également pour Panasonic WV-SW395 : Spécifications (2 pages), Brochure (2 pages), Tableau de comparaison (6 pages), Manuel d'installation (40 pages), Manuel d'installation (40 pages), Note d'intégration (8 pages)

Connection

Caution:

Before starting connection, make sure that the circuit breaker is switched off. Failure to observe this may cause fire,

electric shock, injury, or damage to the product.

Power cable

WV-SW395

8P alarm cable connector

• Power cable

Connect the power cable to the 24 V AC power supply using the 24 V AC power supply connector kit (accessory).

Important:

• The power supply of 24 V AC shall be insulated against 120 V AC (for U.S. and Canada) or 220 V - 240 V AC (for

Europe and other countries).

• Do not cut or process the network cable since the power is superimposed when using a PoE+ device for power sup-

ply. Besides, do not put an excessive weight on connected sections.

Brown

Blue

Green/Yellow

Network cable

Output cable for the

monitor used for

adjustment

External I/O cable

Microphone input cable (white)

Audio output cable (black)

ALARM IN1/DAY/NIGHT IN (black) (EXT I/O 1)

GND (brown)

ALARM IN2/ALARM OUT (red) (EXT I/O 2)

GND (orange)

ALARM IN3/AUX OUT (yellow) (EXT I/O 3)

GND (light blue or green)

Unused (blue)

Unused (purple)

To the power supply (24 V AC, 50 Hz/60 Hz)

GND

LAN cable (category 5e or better, STP*)

* PAL model only

Coaxial cable

(BNC)

8P alarm cable (accessory)

To a plug-in power type microphone

To an external powered speaker

To a PoE+ hub, PC, etc.

To the monitor used

for adjustment

To a sensor