Panasonic WV-SW395 Manuel d'installation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Panasonic WV-SW395. Panasonic WV-SW395 40 pages. Ip video cameras
Également pour Panasonic WV-SW395 : Spécifications (2 pages), Brochure (2 pages), Tableau de comparaison (6 pages), Manuel d'installation (40 pages), Manuel d'installation (40 pages), Note d'intégration (8 pages)

How to detach the housing base

Step 1

Remove the fixing screws (3 pcs.*) that are securing the

housing base and the camera.

The removed screws will be required when attaching the

housing base to the camera again. Use caution not to lose

these screws.

* Special screw (Fixing screw): These screws are hexagon

screws. Use an M5 hexagon wrench.

Housing base

Camera

Protection Cover

SW396A

SW395A

Note:

• If the front and rear sunshields (accessory) are

attached to the camera, detach them by performing

steps 5 - 7 of "Installation" in the reverse order.

(☞ Page 22)

Fixing screws (3 pcs.)

Protection Cover

SW396A

SW395A

Important:

• Remove the Protection Cover from the camera after

the installation is complete.

Step 2

To separate the housing base from the camera, turn the

housing base to the direction of the arrow as illustrated.

(Refer to the illustration in Step 1)

Step 3

Remove the attachment pipe from the upper base by

loosening 4 screws.

x 4

SW396A

SW395A