Panasonic WVNF302 - NETWORK CAMERA Manuel d'installation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Panasonic WVNF302 - NETWORK CAMERA. Panasonic WVNF302 - NETWORK CAMERA 36 pages. Ip video cameras
Également pour Panasonic WVNF302 - NETWORK CAMERA : Brochure (2 pages), Manuel d'utilisation (20 pages), Référence (2 pages), Tableau de comparaison (6 pages), Note d'intégration (8 pages), Manuel d'utilisation (20 pages)

Imprimer la page

Panasonic WVNF302 - NETWORK CAMERA Manuel d'installation

Installations/Connections

Caution:

ONLY CONNECT THIS TO 12 V DC CLASS 2 POWER SUPPLY.

Installation of the camera

Before starting the installation/connection, prepare the required devices and cables. Refer to

the corresponding pages for further information.

z Make a hole in the ceiling and fix the provided camera mount bracket over it. ( page 19)

x Line up the ends of the cables (12 V DC power cable, LAN cable (category 5 or higher),

cable from an external device and the provided audio cable) and the safety wire, and then

bundle them using the provided cable tie. ( page 20)

c Attach the provided safety wire to the safety wire holder of the camera. ( page 20)

v Make the connections of the 12 V DC power cable, LAN cable, audio cable and cable from

an external device. ( pages 22 - 24)

b Mount the camera onto the camera mount bracket. ( page 20)

n Adjust angle of the camera, angular field of view and focus. ( pages 26 - 28)

Ceiling

Camera mount bracket

(provided as a standard

accessory)

Cable tie (provided as a

standard accessory)

Note:

When the camera is installed just above the photogenic subject

as q in the illustration, it may be difficult to adjust angular field

of view focusing around the subject.

To easily adjust angular field of view focusing around the sub-

ject, increase an angle (A) as w.

12 V DC power cable

LAN cable

Cable from an external device

Audio cable (provided as a standard

accessory)

Bundle the cables and

the safety wire together

Safety wire

Anchor bolt x4

(not provided)

Safety wire holder

(A)

Subject