Panasonic WVNP1000 - NETWORK CAMERA Manuel d'utilisation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic WVNP1000 - NETWORK CAMERA. Panasonic WVNP1000 - NETWORK CAMERA 28 pages. Ip video cameras
Également pour Panasonic WVNP1000 - NETWORK CAMERA : Manuel (2 pages), Note d'intégration (8 pages)
Imprimer la page
Lens Mounting
Mount the lens by rotating it clockwise slowly. Then, connect the lens cable to the ALC lens connector of the camera.
ALC lens connector
Attach the ferrite core as close as
possible to the ALC lens connector
side of the lens cable.
Optional lens
ALC lens for 1/3 inch CCD cameras 2x varifocal (high resolution)
Other lenses for 1/3 inch CCD cameras can be mounted on this camera. However, high resolution scanning of this camera
may not be fully used for full-scanning (1280 x 960) or partial scanning (960 x 720).
It is recommended to use a dedicated high-resolution lens when shooting a dark subject with the aperture opened.
Focus adjustment
Focus adjustment
When shooting an object using an AF lens, the first adjusted focus may be out-of-focus depending on the focal depth of the
lens in use. In this case, focus on a darker object with the aperture open to prevent out-of-focus.
When "ABF" is selected for "BACK-FOCUS" on the SETUP menu (→ page 18), the camera can automatically focus on a subject
with the best available conditions even when the illumination changes.
• Under near-infrared light, the focus may be slightly out-of-focus than under visible light.
When the "BACK-FOCUS SETUP" page is displayed and "AUTO" or "PRESET" is selected for "C/L ←→ B/W" using the
operation buttons on the camera, the camera can focus on subjects both under near-infrared light and under visible light.
(However, the camera will not change the focus according to the illumination change when the focus had been adjusted
once.)
12
CS-mount lens (optional)
Lens type
CS-mount: Less than 8 mm
Model number
WV-LZA62/2