Panasonic CT-13R37 Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Panasonic CT-13R37. Panasonic CT-13R37 4 pages. Crt tv

Imprimer la page

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS- All the safety and

operating instructions should be read before

the unit is operated.

2. RETAIN INSTRUCTIONS- The safety and

operating instructions should be retained for

future reference.

3. HEED WARNINGS-All warnings on the unit

and in the operating instructions should be

adhered to.

4. FOLLOW INSTRUCTIONS- All operating and

use instructions should be followed.

5. CLEANING- Unplug this unit from the wall

outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp

cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS- The manufacturer of this

unit does not make any recommendations for

attachments, as they may cause hazards.

7. WATER AND MOISTURE- Do not use this

unit near water. For example, near a bathtub,

washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool.

8. ACCESSORIES- Do not place this unit on an

unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and

serious damage to the unit.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

REMOTE CONTROL

Before using the remote control transmitter, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two "AA" (penlight size) batteries.

3. Replace the battery compartment cover.

POWER SOURCE

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a

standard 120V 60Hz polarized AC outlet.

AC outlet

Wider Hole

and Blade

Polarized AC Cord Plug

(One blade is wider than

the other)

The lightning flash with arrowhead symbol,

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

dangerous voltage within the product's

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

8A. An appliance and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

appliance and cart combination to overturn.

9. VENTILATION- Slots and openings in the

cabinet back or bottom are provided for

ventilation, to ensure reliable operation of the

unit and to protect it from overheating. These

openings must not be blocked or covered. The

openings should never be blocked by placing

the unit on a bed, sofa, rug, or other similar

surface. This unit should never be placed near

or over a radiator or heat source. This unit

should not be placed in a built-in installation,

such as a bookcase, or rack unless proper

ventilation is provided or the manufacturer's

instructions have been adhered to.

10. POWER SOURCE- This unit should be

operated only from the type of power source

indicated on the rating plate. If you are not

sure of the type of power supply to your home,

consult your appliance dealer or local power

company. For units intended to operate from

battery power, or other sources, refer to the

operating instructions.

11. GROUNDING OR POLARIZATION- This

unit is equipped with a polarized alternating

current line plug (a plug having one blade

wider than the other). This plug will fit into the

power outlet only one way. This is a safety

feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If

the plug still fails to fit, contact your electri-

cian to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized

plug. If your unit is equipped with a 3-wire

grounding-type plug, a plug having a third

(grounding) pin, this plug will only fit into a

grounding-type power outlet. This too, is a

safety feature. If you are unable to insert the

plug into the outlet, contact your electrician to

replace your obsolete outlet. Do not defeat

the safety purpose of the grounding-type plug.

Use two "AA" size penlight batteries (supplied)

for the transmitter. The batteries may last

approximately one year depending on how

much the remote control is used. For best

performance, it is recommended that batteries

should be replaced on a yearly basis, or when

the remote operation becomes erratic. Do not

mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when

using batteries in this device:

1. Use only the size and type of batteries

specified.

2. Be sure to follow the correct polarity when

installing the batteries as indicated in the

battery compartment. Reversed batteries

may cause damage to the device.

3. Do not mix different types of batteries

together (e.g. Alkaline and Carbon-zinc) or

old batteries with fresh ones.

4. If the device is not to be used for a long

period of time, remove the batteries to

prevent damage or injury from possible

battery leakage.

5. Do not try to recharge batteries not intended

to be recharged; they can overheat and

rupture.

(Follow battery manufacturer's directions.)

NOTES:

1. Never connect the AC line cord plug to other than

the specified voltage (120V 60Hz). Use the attached

power cord only.

2. If the polarized AC cord does not fit into a non-

polarized AC outlet, do not attempt to file or cut the

blade. It is the user's responsibility to have an

electrician replace the obsolete outlet.

3. If you cause a static discharge when touching the

unit, and the unit fails to function, simply unplug the

unit from the AC outlet, wait a few minutes, and plug

it back in. The unit should return to normal operation.

12. POWER-CORD PROTECTION- Power-

supply cords should be routed so that they

are not likely to be walked on or pinched by

items placed upon or against them, paying

particular attention to cords at plugs,

convenience receptacles, and the point

where they exit from the appliance.

13. LIGHTNING- To protect your unit during a

lightning storm, or when it is left unattended

and unused for long periods of time, unplug it

from the wall outlet and disconnect the

antenna or cable system. This will prevent

damage to the unit due to lightning and

power line surges.

14. POWER LINES- An outside antenna system

should not be located in the vicinity of

overhead power lines, or other electric light

or power circuits, or where it can fall into

such power lines or circuits. When installing

an outside antenna system, extreme care

should be taken to keep from touching such

power lines or circuits as contact with them

might be fatal.

15. OVERLOADING- Do not overload wall

outlets and extension cords as this can result

in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY- Do not push

objects through any openings in this unit as

they may touch dangerous voltage points or

short out parts that could result in fire or

electric shock. Never spill or spray any type

of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING- If an

outside antenna or cable system is con-

nected to the unit, be sure the antenna or

cable system is grounded to provide some

protection against voltage surges and built-up

static charges. Section 810 of the National

Electrical Code, ANSI/NFPA 70, provides

information with respect to proper grounding

of the mast and supporting structure,

grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors,

location of antenna discharge unit, connec-

tion to grounding electrodes, and require-

ments for the grounding electrode.

18. SERVICING- Do not attempt to service this

unit yourself as opening or removing covers

may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified

service personnel.

19. DAMAGE REQUIRING SERVICE- Unplug

this unit from the wall outlet and refer

servicing to qualified service personnel under

the following conditions:

a. When the power-supply cord or plug is

damaged.

b. If liquid has been spilled, or objects have

fallen into the unit.

c. If the unit has been exposed to rain or water.

VOL

R-TUNE

1. POWER - Press to turn the TV on. Press again to turn the TV off.

2. ACTION - Press to display the On-screen menu function. And also, press to enter or select

information for On-Screen operations.

3. VOL (VOLUME)

- Press

to increase, or

also, press to select the desired setting during On-Screen operations.

4. Direct Channel Selection (0-9) - Allows direct access to any channel.

5. R-TUNE - This button allows you to go back to the previous channel selected by just

pressing R-TUNE. Press this button again to return to the channel you were watching.

6. MUTE - To turn off the sound, press this button once. The TV will be silenced and the

symbol "MUTE" will appear on the screen. The muting feature can be released by

pressing MUTE again or one of the VOL

7. CH (CHANNEL)

- Press

Press

to change to a lower numbered channel set into memory. And also, press to select

the desired setting during On-Screen operations.

8. TV/VIDEO - Switches between TV and external input.

9. RECALL - When you press this button, the channel number will appear in the upper right

corner of the screen. Press the button again to remove display from the screen.

d. If the unit does not operate normally by

following the operating instructions.

Adjust only those controls that are

covered by the operating instructions, as

an improper adjustment of other controls

may result in damage and will often

require extensive work by a qualified

technician to restore the unit to its normal

operation.

e. If the unit has been dropped or the cabinet

has been damaged.

f. When the unit exhibits a distinct change

in performance, this indicates a need for

service.

20. REPLACEMENT PARTS- When replacement

parts are required, be sure the service

technician uses replacement parts specified

by the manufacturer or those that have the

same characteristics as the original part.

Unauthorized substitutions may result in fire,

electric shock or other hazards.

21. SAFETY CHECK- Upon completion of any

service or repairs to this unit, ask the service

technician to perform safety checks to

determine that the unit is in proper operating

condition.

22. HEAT- The product should be situated away

from heat sources such as radiators, heat

registers, stoves, or other products (including

amplifiers) that produce heat.

23. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV

system installer's attention to Article 820-40

of the NEC that provides guidelines for proper

grounding and, in particular, specifies that the

cable ground shall be connected to the

grounding system of the building, as close to

the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC-NATIONAL ELECTRICAL CODE

S2898A

VOL

RECALL

Remote control

Part No. EUR501450

to decrease the volume level. And

to change to a higher numbered channel set into memory.

ANTENNA LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)