Panasonic CT-20G21 Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic CT-20G21. Panasonic CT-20G21 24 pages. Panasonic ct-20g21: user guide
Également pour Panasonic CT-20G21 : Manuel d'utilisation (25 pages)

Imprimer la page

TV/Video

Button

- Press the I-V/VIDEO button

to select desired input.

TV/VIDEO

Signal connected to:

REAR VIDEO/AUDIO

INPUT 1 JACKS

TV or CABLE "_

VIDEO I

CH 02 ._

Multi Button

The MULTI button can be programmed to operate up

to 6 Remote function buttons at the same time.

For Example: TV Power/On, VCR Power/On (selected

brands) can be operated at the same time with one press

of the MULTI button.

Procedure

First program the Remote for the selected VCR

Infrared access code. Confirm that the Remote

Control is compatible with the equipment.

Face the Remote Control transmitter away from all

equipment remote sensors.

Press and hold down the Remote TV Power button,

then press and hold down the MULTI button at the

same time. Release buttons (All previous com-

mands will be erased.)

Recall

Button

Press the RECALL button to

review:

• Audio Mode status

• CH number or Video Input selected

• Sleep Timer status

• Clock time

• Channel Caption (Station Identifier)

RECALL

CH 03

XYYZ

1:00

Cable Power Button

- TheCABLE POWER

button on the Remote Control has been designed to

operate selected brands of Cable Television Converter

boxes.

The proper

cable

television

converter

box

infrared code must be obtained prior to use. (Please

refer

Programming

the

Universal

Remote

for

programming

instructions.)

The

Remote

Control

TV/CABLE switch should be in the CABLE position.

NOTE: The CHANNEL UP and DOWN buttons on the

Remote may be used for selecting Cable Con-

verter box channels.

CABLE

POWER

Located On Remote Control

Use to select

Cable

Box

Channels after programming

Infrared Code.

(TV)

POWER

MULTI

PRESS SIMULTANEOUSLY

Press a maximum of 6 Function buttons on the

Remote.

Each button you press is equal to one function. If six

Remote button functions are entered, all will register

in the MULTI button memory

in the sequence

entered.

When

less

than

six

Remote

button

functions are entered, press the MULTI button to

end the program

mode. (Waiting more than 30

seconds without pressing another button will also

end the program mode.)

The following

is an example of Remote functions

that can be programmed into the MULTI button,

TV Power-

For turning TV ON and OFF.

VCR Power - For turning

VCR ON and OFF

(selected brands after programming

it's Infrared

access code, if necessary).

Both can be turned ON or OFF with one press of the

MULTI button.

(TV)

POWER

VCR POWER

To delete entered functions

- Repeat step 3. Now

you can enter from one to six different

Remote

functions.

NOTE:

You can also program the MULTI button to perform

most individual Remote Control button functions.

Buttons which continuously

perform a function as

long

as pressed

(Volume

Up/Down,

Channel

Up/Down, etc.) cannot be programmed. Only those

buttons which perform

a function

when initially

pressed (Power On/Off, Mute, Direct Channel Entry,

etc.) can be programmed.

-11 -