Panasonic CT-25G6 Manuel d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic CT-25G6. Panasonic CT-25G6 13 pages. Panasonic ct-13r32: user guide
Également pour Panasonic CT-25G6 : Manuel d'utilisation (12 pages), Manuel d'utilisation (13 pages), Manuel d'utilisation (13 pages), Manuel d'utilisation (13 pages)
![Panasonic CT-25G6 Manuel d'utilisation](/uploads/products/server2/3760582/3760582.png)
Cable / Antenna
For proper reception, either a cable or antenna
connection are required.
Cable Connection
Connect the cable supplied by your local
cable company.
A cable converter box may be required for
proper reception. Check with your local
Cable
company
requirements.
Incoming Cable from Cable Company
75 Ohms VHF/UHF
on back of TV
Antenna Connection
•
For
proper
channels,
an
required. For best reception an outdoor
antenna is recommended.
•
Antenna Mode must be set to TV.
VHF/UHF Antenna
A VHF/UHF antenna and transformer are
supplied in some models. Attach to the TV,
adjust the antenna until the picture is clear.
(See Antenna Connection).
Incoming Cable from Home Antenna
Note:
Cable Mode is preset at the factory.
Antenna users must change to Antenna
Mode in the Set Up Menu.
Terminals on back of TV (some models)
VIDEO
STEREO MODELS
VIDEO
Jack used for
1/8" earphone plug
(some models)
(some models)
for
compatibility
reception
of
VHF/UHF
external
antenna
is
(Cables not supplied)
Terminals on front of TV (some models)
L -AUDIO- R
L -AUDIO- R
Optional Equipment
Connections
Procedure
1.
Connect equipment, as shown, to front
or rear Audio/Video input jacks.
Note:
2.
Select the Video mode by pressing TV/
VIDEO button.
3.
Operate
instructed in equipment manual.
VCRs, video disc players, video game equipment,
and DSS equipment can also be connected to the
antenna input connection. (See your equipment
manual).
To Audio Amplifier
Connect to an external audio amplifier input for
listening to sound from a stereo system.
Note:
TO AUDIO AMP terminals cannot be
used directly for external speakers.
Audio Adjustments
1.
Select TV SPEAKERS ON from AUDIO
menu.
2.
Set amplifier volume to minimum.
3.
Adjust TV volume to desired level.
4.
Adjust amplifier volume to match the TV.
Select OFF&VAO from AUDIO menu.
5.
6.
Volume and mute are now selected
using the TV controls.
Note:
In OFF&FAO the volume is controlled by
the external amplifier.
VCR or Video Disc
Terminals on back of VCR
MONO MODELS
Jack used for
Jack used for
Jack used for
Jack used for
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
(some models)
(some models)
(some models)
(some models)
- 3 -
Front and rear Audio/Video
connections
cannot
operated at the same time.
optional
equipment
(some models)
VIDEO
AUDIO
be
l
as