Panasonic CT-27D31C Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic CT-27D31C. Panasonic CT-27D31C 25 pages. 36" diagonal stereo monitor-receiver
Également pour Panasonic CT-27D31C : Manuel d'utilisation (50 pages), Manuel d'utilisation (50 pages)

Imprimer la page
Tu-_Pi_
_ ";;,eration
with a VCR - No Cable
Box
Note:
Refer to the FEATURE COMPARISON
CHART on page 3 for your television PIP capability
This television
includes a Picture In Picture (PIP) feature. A second video source
(VCR) is required to provide a second picture.
Connect your television to a VCR, as shown:
CONNECTION
ON BACK OF
I
(X3F.,T:K3NFJ"IT
R_
alj(310_
L
"vlDEO INPUT
Q
Q
!
P_--
pa m
YNI[3[-O
Q Q Q
VCR
®L
_AL_OOUT
R
J
CABLES NOT SUPPLIE_
Incoming
Cable
Note:
The Remote Control must be programmed with the supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Turn the VCR OFF and tune the TV to channel
3.
Press the PIP button
on the Remote
Control to display
the PIP frame
on screen.
Note:
The PIP picture is the same as the Main picture, initially.
C3 Press the TVNIDEO
button on the Remote Control to select the VIDEO PIP source
[]
Press the VCR button on the Remote Control and turn ON the VCR.
[3
Press the TVNCR
button on the Remote Control
[]
Choose
channels
for PIP frame by pressing VCR CHANNEL
up/down buttons on the
Remote Control
[3
Choose channels for the Main Picture by pressing the TV button on the Remote Control
and using the numeric keypad or CH up/down buttons.
\1/
SWAP and RECALL Buttons
The SWAP button switches the PIP and Main Picture
source
Press the RECALL button for on screen PIP
and Main Picture source status.