Panasonic CT-27G23 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic CT-27G23. Panasonic CT-27G23 32 pages. 27" diagonal stereo monitor-receiver
Également pour Panasonic CT-27G23 : Manuel d'utilisation (32 pages), Manuel (16 pages)

Imprimer la page

PICTURE In PICTURE (PIP) OPERATION

Picture In Picture (PIP) Operation

PIP Operation with a VCR and Cable Box

This television includes a Picture In Picture (PIP) feature.

A second video

source (VCR, Camcorder, etc.) is required to provide a second picture.

Connect your television to a VCR and Cable Box, as shown.

(Some models

have only one video input and some models have an S-VIDEO video input.)

CABLE BOX

TERMINALS ON BACK OF Tv

Incoming

Cable

TIPO

LES

AUDIO OUT

Cable Splitter

TO AUDIO

(Nat Supplied)

AMP

CABLES NOT SUPPLIED

Note:

The Remote Control must be programmed with supplied codes to

operate the VCR and Cable Box.

See Programming the Remote

Control in the Remote Control Quick Reference Guide.

Procedure

Press the PIP button on the Remote Control to display the PIP frame.

Note:

The PIP picture is the same as the main picture, initially.

To view a different picture in the PIP frame:

Press the TV/VIDEO button on the Remote Control to select

the video PIP source.

Note:

Verify the CABLE BOX and VCR are ON and the VCR

tuned to channel 3.

Choose channels for the PIP frame by pressing the CABLE

button on the Remote Control and using the numeric keypad

or CH up/down buttons.

Choose channels for the Main Picture by pressing the TV

button on the Remote Control and using the numeric keypad

or CH up/down buttons.

Nye st

SWAP Button

The SWAP

button

switches

the PIP and

Main

Picture source.

Press the RECALL button for PIP

and Main Picture source status, on screen.