Panasonic CT-32D10U Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic CT-32D10U. Panasonic CT-32D10U 21 pages. Color tv
Également pour Panasonic CT-32D10U : Manuel d'utilisation (37 pages), Instructions d'utilisation (36 pages)
Imprimer la page
INSTALLATION
Installation
Television
Location
This
unit
is intended
to be used
with an optional
stand
or entertainment
center.
Consult
your dealer for available
options,
£3
Avoid excessive
sunlight or bright lights, including reflections.
£3
Keep away from excessive
heat or moisture.
Inadequate
ventilation
may cause internal
component failure.
£3
Fluorescent
lighting may reduce remote control transmitting
range.
£3
Keep away from magnetic equipment,
including motors, fans and external speakers.
Optional
Cable Connections
Shielded
audio
and
video
cables
should
be used
between
components.
For
best
results:
Use 75-ohm coaxial shielded cables.
C3
Use appropriate
input and output connectors,
that match your component
connectors.
C3 Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:
TO PREVENT
ELECTRIC
SHOCK MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET
AND FULLY INSERT.
DO NOT USE A PLUG WITH A
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE
BLADE
CAN
BE
FULLY
INSERTED
TO PREVENT
BLADE EXPOSURE.
FOR SOME MODELS THAT ARE
NON-POLARIZED,
THE USE OF AN AC ADAPTOR CONNECTOR
MAY
BE NECESSARY.
Polarized plug
Non-Polarized plug
Cable / Antenna Connection
For proper
reception,
either
a cable
or antenna
connection
is required.
Cable Connection
Incoming Cable from
Connect
the cable
supplied by your
local cable
company.
Note:
A cable converter
box may be required
for proper reception.
Check
with
your
local
cable
company
for
compatibility
requirements,
Antenna
Connections
t-i
For proper reception of VHF/UHF
channels, an external antenna is
required. For best reception an outdoor antenna is recommended.
£3
Antenna Mode must be set to FV.
i---_/-
Cable
Preset
Cable Mode is preset at the factory, Antenna
users must change to Antenna Mode in the
Setup Menu.
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna
III