Diamond Audio Technology CM361 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Diamond Audio Technology CM361. Diamond Audio Technology CM361 10 pages. Cm3 series convertible speaker systems

Imprimer la page

Bridge Mounting

1. Remove grill from mid bass speak-

er.

2. Align bridge over mid bass cone

so that the narrow end of the

bridge makes connection with the

points over the terminal side of

the mid bass speaker.

3. Mount bridge to the mid bass

frame using the provided counter-

sink bridge mounting screws. (do

not over tighten)

4. Replacing the grill is optional.

Mid Bass Speaker Mounting

1. Remove grill from mid bass if not already done.

2. Attach provided mid bass speaker gasket to the rear mounting surface

of the frame to ensure proper seal.

3. Mount in desired location using the provided mounting screws. Be cer-

tain to mount the speaker on a flat surface to avoid twisting the frame.

4. Some locations will require pre-drilled mounting holes and screw holes.

Use the provided mounting screw clips in these cases.

5. Follow the wiring instructions detailed later in this manual to finish

installation. (some wiring may need to be done before permanately

mounting the speaker)

6. Replacing the grill is optional.